COMMSCOPE SA,4C 4-Way Snap-in Style Hanger Stand-off Adapter
Specifications:
- Material: Metal
- Size: 4-way adapter
- Mounting Hole Size: 3/4 inch
- Mounting Hardware Size: 3/8 inch
- Maximum Hanger Loading: Twelve 4-17 mm hangers or eight 26-42 mm hangers
Product Usage Instructions
Banding Installation:
Insert the banding through the desired slots on the 4-way adapter. Use the outside slots for mounting on large diameter pipes and poles, and the inside slots for smaller diameters.
Securing the Adapter:
Tighten the banding to securely attach the 4-way adapter to the round member. Cut off any excess strap tail for a clean finish.
- Insert banding though desired slots. Use outside slots for mounting on large diameter pipes and poles. Inside slots for small diameters.
- Tighten banding to secure 4-way adapter tightly to round member. Cut off excess strap tail.
- Configuration showing adapter securely attached to round member. Maximum hanger loading is twelve 4-17 mm hangers or eight 26-42 mm hangers.
- 4-way adapter can also be mounted to tower angle and standoff adapters with 3/8” hardware. Same maximum hanger loading applies.
- 4-way adapter can also be mounted to tower angle and standoff adapters with 3/8” hardware. Same maximum hanger loading applies.
| Additional CommScope Materials | |
| Part Number | Description |
| CB-12-16LH | Heat-stabilized weather resistant acetal cable banding, 1/2 in x 16 in length |
| CB-12-27LH | Heat-stabilized weather resistant acetal cable banding, 1/2 in x 27 in length |
| CB-12-50 | Cable banding, ½ inch X 50 foot reel |
| CB-LH-25 | Locking heads for cable banding number CB-12-50 |
| 243684 | Angle adapter |
| SSH-411 | 4.0 mm to 11.0 mm cable hangers – PIM Free |
| SSH-1117 | 11.0 mm to 17.0 mm cable hangers – PIM Free |
| SSH-2630 | 26.0 mm to 30.0 mm cable hangers – PIM Free |
| SSH-3642 | 36.0 mm to 42.0 mm cable hangers – PIM Free |
Mounting Options:
Option 1: Attach the adapter to a round member as shown in the configuration. Ensure a tight fit for stability. The maximum hanger loading capacity varies based on the size of hangers used.
Option 2: The 4-way adapter can also be mounted to tower angle and standoff adapters using 3/8 hardware. The same maximum hanger loading capacity applies in this configuration.
Additional CommScope Materials:
For related products and accessories, refer to the following part numbers:
- CB-12-16LH
- CB-12-27LH
- CB-12-50
- CB-LH-25
- 243684
- SSH-411
- SSH-1117
- SSH-2630
- SSH-3642
Contact Information:
CommScope 3642 E US Highway 70, Claremont, NC 28610 USA
Technical Support: +1 888 297 6433
(Toll-Free US and Canada) or +1828 323 4220 (local)
Website: www.commscope.com/wisupport
Frequently Asked Questions (FAQ):
Q: What is the maximum hanger loading capacity for the 4-way adapter?
A: The maximum hanger loading capacity is twelve 4-17 mm hangers or eight 26-42 mm hangers.
Q: Can the 4-way adapter be mounted on tower angle and standoff adapters?
A: Yes, the 4-way adapter can also be mounted on tower angle and standoff adapters using 3/8 hardware. The same maximum hanger loading capacity applies in this configuration.
Documents / Resources
 |
COMMSCOPE SA,4C 4-Way Snap-in Style Hanger Stand-off Adapter [pdf] Installation Guide SA-4C, CB-12-16LH, CB-12-27LH, CB-12-50, CB-LH-25, SSH-411, SSH-1117, SSH-2630, SSH-3642, SA, 4C 4-Way Snap-in Style Hanger Stand-off Adapter, SA 4C 4-Way Snap-in Style Hanger Stand-off Adapter, SA 4C, 4-Way, Snap-in Style Adapter, Hanger Style Adapter, tand-off Adapter, Adapter |
