2A88P-1006 WiFi Display Plus Range Extender
“
Specifications
- Product Name: WiFi Display + Range Extender CI-TR-101-Y
- FCC ID: 2A88P-1006
- IC ID: 29707-1006
- Operating Frequency Ranges: BLE: 2402-2480MHz, WiFi [802.11b,
US only]: 2401-2473MHz - Compliance: Complies with IMDA Standards
Product Usage Instructions
Safety Guidelines
It is important to follow these safety guidelines to ensure
proper usage and to prevent any accidents:
- Do not use the equipment in a manner not specified by the
manufacturer. - Do not co-locate this transmitter with any other antenna or
transmitter. - Avoid disposing of the battery into fire, hot oven, or
mechanically crushing/cutting it. - Avoid extreme temperature environments for the battery.
Getting Started
To begin using the product:
- Open the camera on your mobile device.
- Point it at the provided QR code.
- Follow the web page instructions for setup.
Display Functions
The display functions can be accessed by:
- Pressing and holding the light button + start stop button.
- Red backlight indicates operation.
Firmware Update
To update the firmware:
- Follow the instructions in the Combustion App.
Setting up WiFi
To set up WiFi:
- Get the app.
- Update all firmware.
- Charge the device.
- In the app, navigate to ‘WiFi Devices’.
- Select your tool and ‘Join network’.
- Choose network and enter the network password.
Charging
| Charging type | Thermometer charging time | Thermometer battery life | Display charging time | Display battery life |
|---|---|---|---|---|
| USB-C | 25 min | 90+ hours | 90 min | 28 days |
FAQ
Q: What should I do if I encounter issues with WiFi
connectivity?
A: If you experience WiFi connectivity issues, try restarting
the device and ensuring you are within range of your network. You
can also refer to the user manual for troubleshooting tips.
Q: How do I dispose of used batteries properly?
A: Used batteries should be disposed of according to the
provided instructions. Do not replace batteries with incorrect
types to avoid any risk of explosion.
Q: Can I wear the device on my body at all times?
A: The device meets SAR limits set by regulatory bodies when
properly worn on the body. However, it is recommended to follow
safety guidelines and avoid prolonged skin contact with the
device.
“`
CAUTION The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s) and Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (a) Reorient or relocate the receiving antenna, (b)Increase the separation between the equipment and receiver, (c) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected, (d) Consult the dealer or an experienced radio/TV technician for help.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.
FCC & IC RADIATION EXPOSURE STATEMENT This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device contains licence-exempt transmitter/receiver that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
DÉCLARATION D’IC SUR L’EXPOSITION AUX RADIATIONS Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des environnements non contrôlés. Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur.
The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body
Le dispositif portatif est conçu pour répondre aux exigences d’exposition aux ondes radio établie par le développement énergétique DURABLE. Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR la plus élevée signalée en vertu de cette norme lors de la certification de produit à utiliser lorsqu’il est correctement porté sur le corps.
BLUETOOTH® The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Combustion, Inc. is under license. Other trademarks and trade names are those of their respective owners.
BATTERY WARNING Do not dispose of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery that can result in an explosion.
Do not leave a battery in an extremely high temperature environment that can result in an explosion or leakage of flammable liquid or gas.
Do not expose the battery to extremely low air pressure that may result in an explosion or leakage of flammable liquid or gas.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
WiFi Display + Range Extender CI-TR-101-Y FCC ID: 2A88P-1006 IC ID: 29707-1006
Operating Frequency Ranges: BLE: 2402-2480MHz WiFi [802.11b, US only]: 2401-2473MHz
Complies with IMDA Standards
DB123456
Getting started is easy!
(ASSUMING YOU LIKE QR CODES)
1 Open the camera on your mobile device:
2 Point it at this spooky square:
3 Your phone will show a web page with instructions, helpful videos, and so on.
combustion.inc/start
Getting Started
Or just type this into your web browser: combustion.inc/start
Designed by Combustion, Inc., in Seattle WA, USA. All rights reserved. The Combustion Inc. logo is owned by Combustion, LLC.
Display Functions
time m s + m + s+ start stop
temp m / s+ m + s+
hold temp 1 second light hold light + m
hold light + start stop
with red backlight
Timer mode Add minutes Add seconds Clear timer Start countdown/up Temperature mode Set target temp Clear target temp Toggle ·F / ·C Backlight on Adjust backlight brightness Cycle backlight color ( m to set) Factory reset Low charge Thermometer connected Thermometer battery low Thermometer over max temp limit!
Firmware update
Follow the instructions in the Combustion App to update the Display’s firmware (its internal operating system).
Setting up WiFi
Use the QR code or link for detailed instructions.
Briefly: 1. Get the app 2. Update all the firmware 3. Charge everybody 4. In the app, ‘WiFi Devices’ 5. Select your tool, ‘Join network’ 6. Choose network + enter network
password
Charging
Charging type Thermometer charging time Thermometer battery life Display charging time Display battery life
USB-C 25 min 90+ hours 90 min 28 days
Documents / Resources
 |
Combustion Inc 2A88P-1006 WiFi Display Plus Range Extender [pdf] User Guide 2A88P-1006, 2A88P-1006 WiFi Display Plus Range Extender, WiFi Display Plus Range Extender, Display Plus Range Extender, Range Extender |