Combustion CI-TR-101-Y WiFi Display + Range Extender
Model Numbers: CI-TR-101-Y, 1006, 2A88P-1006, 2A88P1006
Brand: Combustion Inc.
Getting Started is Easy!
(Assuming you like QR codes)
-
Open the camera on your mobile device:
Use your smartphone's camera app.
-
Point it at this spooky square:
Scan the QR code provided.
[Visual description: A square QR code is shown here.]
-
Your phone will show a web page with instructions, helpful videos, and so on.
Alternatively, type the following into your web browser:
combustion.inc/start[Visual description: A screenshot of a mobile browser showing the 'Getting Started' page with the URL combustion.inc/start.]
Display Functions
| Button Action | Function |
|---|---|
time |
Timer mode |
m- |
Add minutes |
s+ |
Add seconds |
m- + s+ |
Clear timer |
start stop |
Start countdown/up |
temp |
Temperature mode |
m- / s+ |
Set target temp |
m- + s+ |
Clear target temp |
hold (temp) 1 second |
Toggle °F / °C |
light |
Backlight on |
hold (light) |
Adjust backlight brightness |
hold (light) + m- |
Cycle backlight color (using [m- button] to set) |
hold (light) + start stop |
Factory reset |
| [red backlight indicator] | Low charge, Thermometer connected, Thermometer battery low, Thermometer over max temp limit! |
Firmware Update
Follow the instructions in the Combustion App to update the Display's firmware (its internal operating system).
Setting up WiFi
Use the QR code or link for detailed instructions. Briefly:
- Get the app.
- Update all the firmware.
- Charge everybody.
- In the app, navigate to 'WiFi Devices'.
- Select your tool and choose 'Join network'.
- Choose your network and enter the network password.
Charging
| Item | Details |
|---|---|
| Charging type | USB-C |
| Thermometer charging time | 25 min |
| Thermometer battery life | 90+ hours |
| Display charging time | 90 min |
| Display battery life | 28 days |
Important Information and Compliance
CAUTION
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s) and Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
(French translation of the above statement is also present.)
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (a) Reorient or relocate the receiving antenna, (b) Increase the separation between the equipment and receiver, (c) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected, (d) Consult the dealer or an experienced radio/TV technician for help.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.
FCC & IC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.
(French translation of the above statement is also present.)
BLUETOOTH®
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Combustion, Inc. is under license. Other trademarks and trade names are those of their respective owners.
BATTERY WARNING
Do not dispose of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery that can result in an explosion.
Do not leave a battery in an extremely high temperature environment that can result in an explosion or leakage of flammable liquid or gas.
Do not expose the battery to extremely low air pressure that may result in an explosion or leakage of flammable liquid or gas.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Compliance Marks
[CE Mark] [UKCA Mark] [RoHS Compliant] [Complies with IMDA Standards DB123456]
Operating Frequency Ranges: BLE: 2402-2480MHz, WiFi [802.11b, US only]: 2401-2473MHz
