ZY-G6-WIFI WIFI Wireless PTZ Security Camera
error
error code: 502
the following is the text from the user manual / instructions:
User Guide
E-mail: service@cococamtech.com Website: www.cococamtech.com
ZY-G6 WF SCSMS-20250225
Contents
Claim Your Life Warranty
Thank you for choosing COCOCAM products. If anything has happened to your product, please contact us for a life warranty.
cococam
cococam
E-mail: service@cococamtech.com Website: www.cococamtech.com
EN
Contents
1.Product details ————————————————-01 2.Install camera —————————————————02 3.Install Cococam app ——————————————-02 4.Switch on camera ———————————————-04 5.Add camera —————————————————–04 6.Device menu —————————————————-07
——————————————–09 8.Message page —————————————————11
—————————–12 10.Video playback and micro SD card ———————–12
1. Product details
Power Button
Reset
Spotlight Charging Indicator Microphone
TF Card Slot
Working Status Indicator Lens
No. Camera Buttons
Operation
1
Power Button Press and hold the button for five seconds to turn the device on and off.
2
Power Button Quick-press for one second to wake the camera up from standby mode.
3
Reset Key
Press and hold for five seconds to reset and restart the camera.
No.
LED Status
Operation
1 Slow blinking red 2 Blue light flashes
Red and blue lights
3
flash alternately
4
The blue light is always on
The camera is connecting to the Internet The camera is successfully connected to the Internet and is waiting to be added.
Camera failed to connect to network
The camera has been successfully connected to the Internet and has been added for use.
-01-
2. Install camera
Please fix the bracket, then install the camera. 1. lf it is a wooden wall, you can use the nails provided with the product to fix the bracket to
the wall. 2. lf it is cement wall or ceramic tile wall, please use an electric drill to drill a hole in the wall
and then install the bracket with the expansion screw provided with the product.
1. Adjust the Bracket 2. Ceiling Installation
3. Wall Installation 4. Bracket Screws
3. Install Cococam app
Search Cococam in the app store or on GooglePlay or scan the QR code to download and install the app on your phone.
-02-
NOTE: Please turn on two permissions below when you use this app for the first time. 1. Allow Cococam access to mobile cellular data and wireless LAN, or you will be unable to
add the camera. 2. Allow Cococam to receive push messages, or the phone will not receive notifications
when motion is detection or the audible alarm is triggered.
3.1 Register account: New users need to register by e-mail. Click Register and follow the steps to complete registration and log in. 3.2 Help and feedback For product issues or questions, please email service@cococamtech.com with your product model number. We will reply to you within 24 hours.
-03-
4. Switch on camera
Press the power button for five seconds to turn the camera on. lf it does not power on, please plug in the DC5V 1A/2A power adapter and charge the camera for 15 minutes before trying again. The camera is on when the indicator light below the lens is flashing slowly.
User Guide
E-mail: service@cococamtech.com Website: www.cococamtech.com
ZY-G6 WF SCSMS-20250225
Contents
Claim Your Life Warranty
Thank you for choosing COCOCAM products. If anything has happened to your product, please contact us for a life warranty.
cococam
cococam
E-mail: service@cococamtech.com Website: www.cococamtech.com
EN
Contents
1.Product details ————————————————-01 2.Install camera —————————————————02 3.Install Cococam app ——————————————-02 4.Switch on camera ———————————————-04 5.Add camera —————————————————–04 6.Device menu —————————————————-07
——————————————–09 8.Message page —————————————————11
—————————–12 10.Video playback and micro SD card ———————–12
1. Product details
Power Button
Reset
Spotlight Charging Indicator Microphone
TF Card Slot
Working Status Indicator Lens
No. Camera Buttons
Operation
1
Power Button Press and hold the button for five seconds to turn the device on and off.
2
Power Button Quick-press for one second to wake the camera up from standby mode.
3
Reset Key
Press and hold for five seconds to reset and restart the camera.
No.
LED Status
Operation
1 Slow blinking red 2 Blue light flashes
Red and blue lights
3
flash alternately
4
The blue light is always on
The camera is connecting to the Internet The camera is successfully connected to the Internet and is waiting to be added.
Camera failed to connect to network
The camera has been successfully connected to the Internet and has been added for use.
-01-
2. Install camera
Please fix the bracket, then install the camera. 1. lf it is a wooden wall, you can use the nails provided with the product to fix the bracket to
the wall. 2. lf it is cement wall or ceramic tile wall, please use an electric drill to drill a hole in the wall
and then install the bracket with the expansion screw provided with the product.
1. Adjust the Bracket 2. Ceiling Installation
3. Wall Installation 4. Bracket Screws
3. Install Cococam app
Search “Cococam” in the app store or on GooglePlay or scan the QR code to download and install the app on your phone.
-02-
NOTE: Please turn on two permissions below when you use this app for the first time. 1. Allow Cococam access to mobile cellular data and wireless LAN, or you will be unable to
add the camera. 2. Allow Cococam to receive push messages, or the phone will not receive notifications
when motion is detection or the audible alarm is triggered.
3.1 Register account: New users need to register by e-mail. Click “Register” and follow the steps to complete registration and log in. 3.2 Help and feedback For product issues or questions, please email service@cococamtech.com with your product model number. We will reply to you within 24 hours.
-03-
4. Switch on camera
Press the power button for five seconds to turn the camera on. lf it does not power on, please plug in the DC5V 1A/2A power adapter and charge the camera for 15 minutes before trying again. The camera is on when the indicator light below the lens is flashing slowly.
Power Button
5. Add camera
Before Using: 1. If using sd card Before power-on,please insert the Micro- sD card (2-128GB). If the Micro –
SD card is inserted afterpower-on, detection may fail and the product will need tobe powered on again. 2. Before adding the camera, please turn on the Bluetooth permission and positioning permission of the APP, then turn on the Bluetooth of the phone and start preparing to connect the camera.(Note: Failure to open the APP will cause the camera connection to fail).
3. Please keep the distance between the camera and the router within 10 meters to ensure stable signal and successful camera network connection.
-04-
You can scan the QR code below or visit the link to watch the added video
Product adding method : Through Bluetooth
æPress and hold the camera power button and wait for the camera LED working indicator to flash red. ç Click “+” at upper right of home page of the APP to add the product. On the product adding page, a list of the nearby cameras that can be connected through Bluetoothwill appear automatically. è Select the camera, search for the nearby 2.4G band wifi that needs to be connected, enter the wifi password and wait for the camera to automatically connect to wifi, and then complete adding the camera.
-05-
-06-
6. Device menu
1
2
11
12
3
5
14
13
15
6
4
7 16
17
18
19
21
20
23
22
24
9
8
10
-07-
29
30
26 32
25
27
31
33
35
28
34
1. Add Device 2. Display List 3. Hidden Image 4. Real-time Image 5. Local Playback 6. S/N 7. Camera Setting 8. Home Page 9. APP Message List 10. Personal Center 11. Camera Setting 12. Camera Time
14. Image Fluency 15. Full Screen 16.Battery Level 17.network speed 18. Select Definition 19. Snapshot Manually 20. Enable Microphone 21. Select Intercom Sound 22. Record Manually 23. Rotate PTZ 24. Turn on Daylight Lamp Manually 25. Enable Alarm Sound Manually
26. Audible and Visual Alarm 27. Night Vision 28. Images Snapshotted and
Recorded Manually 29. Pause/Play 30. Alarm Segment 31. Select Alarm Date 32. Alarm point 33. Snapshot Manually 34. Record Manually 35. Images Snapshotted and
Recorded Manually
-08-
7. Background setting
1
3 2
4
5
6 7
8
9
10 11
12
13 14
15 16 17 18
-09-
1. View Device Information 2. Enable/Disable Alarm Push 3. Enable Alarm Detection: For human/vehicle recognition, sensitivity adjustment, alarm period setting, alarm area setting 4. Image Setting: For video coding format setting, image flip, night vision, etc. 5. Share Device: For sharing the device with others (The device can only be shared to other users in the same country, otherwise the system will indicate that the account does not exist.) 6. Suggestions for installation 7. Choose Installation Position 8. Enable/Disable Lens Indicator 9. Enable Daylight Lamp Setting Manually (The daylight lamp cannot be enabled when the battery level is lower than 20%.) 10. Enable/Disable Movement Tracking 11. PTZ calibration: The PTZ rotates up and down and left and right to complete the self-test 12. Operating Mode: Power-saving Mode, Performance Mode, Custom
*Power saving mode: full-time recording defaults to 5 frames per second, and alarm recording has a 3-second delay interval
*Performance mode: full-time recording defaults to 2 frames per second, and alarm recording has a 6-second delay interval
*Custom mode: You can manually adjust the camera’s full-time recording frame rate and alarm recording delay time
13. Battery Management: For viewing the remaining battery level, setting the battery level for disabling continuous recording, or entering the power-saving mode 14. Video Management: For viewing capacity of the SD card 15. Contact Us: E-mail for after-sales service 16. Check New Version 17. Restart Device 18. Delete Device
-10-
8. Message page
1. Play Alarm Video 2. Share 3. View Alarm Image 4. Play Alarm Video
2 1
3
4
-11-
9. Best conditions for night vision
Within three meters of the lens will cause infrared rays to concentrate on it and illuminated and the night vision will not work. No matter where the camera is installed, make sure there are no obstacles within three meters of the lens.
10. Video playback and micro SD card
Video recordings are stored in the micro SD card (not included) or on the cloud. 1. Only support 2-128GB 2. To ensure a steady recognition rate and micro SD card life, we recommend a Class10
Speed Micro SD Card, Samsung, SanDisk, or Kinston Micro SD Card. 3. Check the micro SD card for damage and format it before inserting into the camera.
The format must be FAT32 or EXFAT32. 4. After you insert the micro SD card into the camera, the memory volume will show in
the Cococam app. This means the camera micro SD card is readable. 5. If the micro SD card is not readable, contact us for assistance.
-12-
No.
Description
Troubleshooting table Solutions and operation
1) Check if the network status of the router is normal
2) After the camera restarts, you will hear a “bugu” sound. Wait for
What should I do if the one minute until the camera turns blue and flashes and makes a
1
camera cannot
sound before adding it.
be added?
3) Before adding the camera, keep the distance between the camera and the router within ten meters
4) If you have any questions, please contact our 24-hour customer
service as soon as possible to solve it for you.
2
How do you reset to default?
1) Press and hold the reset button for five seconds. 2) Listen for the “bugu” sound. 3) Watch for the red light flashing slowly.
The camera and the router with the network configuration should be
Camera access always within 10 meters, and the signal should be kept above 75% to avoid
3
appears offline? slow access speed and disconnection problems caused by poor
network signal.
4
Why am I receiving frequent alarms?
The environment or the number of vehicles where you have installed the camera triggers the cameras frequently. Change the camera alarm sensitivity to “low”.
Please check the minimum battery level for continuous recording under
5
Why does full-time “Battery Management”. If the actual battery level is lower than the set
recording stop?
value, the camera will enter the power-saving mode and stop continu-
ous recording.
6
No alarm push
Enable notifications from the CocoCam app in the mobile settings.
7
No alarm video recording
Insert the micro SD card or enable cloud storage.
-13-
8
Cococam app flashbacks
1) It may be that your phone system version is too low or too high, resulting in poor compatibility. Uninstall the APP and re-download it.
2) Contact customer service staff with the model number of your
camera and the system number of your mobile phone.
1) When registering an account, please ensure you select the correct
9
Unable to register account
country. 2) You do not need to enter a verification code. Please follow the
process to register your account.
Your account and your friend’s account must be registered in the same 10 Unable to add friend country or the same area. For example, accounts in Europe and
America cannot be friends.
If any human has been detected, the video will be smooth because of
Why are the
the maximum frame rate; if no moving object has been detected, the
11
videos jerky?
camera will record all day with a low frame rate to minimize the power
consumption. To enable the maximum frame rate in continuous
recording, set under “Operating Mode”.
-14-
Documents / Resources
![]() |
COCOCAM ZY-G6-WIFI WIFI Wireless PTZ Security Camera [pdf] Instruction Manual SCSMS-20241217, SCSMS-20250225, ZY-G6-WIFI WIFI Wireless PTZ Security Camera, ZY-G6-WIFI, WIFI Wireless PTZ Security Camera, Wireless PTZ Security Camera, PTZ Security Camera, Security Camera |