Cocinare CES-223 Precision Coffee Scale
A team of diverse professionals united by our love for coffee and passion for innovation. With our expertise in engineering, design, and technology, we’re confident in our ability to innovate and bring something new to the coffee industry. Our obsession with coffee drives us to create exceptional products and solutions that go beyond the norm. We can’t wait to welcome you aboard our team.
Product Diagram
Operation Guide
Assist Mode
- Start Assist Mode
Press and hold the [Power Button] for 2 seconds to turn on the device, which defaults to Assist Mode. - Setup and Preparation
Adjust your preferred brew ratio by pressing or holding the – or [+] buttons.
- Place the equipment
Place the sharing pot and filter cup, then press the [Power Button] to zero the weight. - Start Brewing Interface
Add your ground coffee; the device automatically calculates the water needed. Tap the [Timer Button] to start brewing, with the timer and flow rate display enabled.
- Start Brewing
Brew according to your method. The built in timer starts automatically, the top displays real-time flow rate, and upon completion of a brew, it shows the average flow rate for that session. - Brewing Complete
The device beeps when the water is 10g short of the target. Its beeps twice and the target icon lights up when the desired water amount is reached, signaling the end of brewing.
Weigh Mode
- Weigh Mode
Double-press the [Power Button] to switch modes and enter Weigh Mode. You can then lightly touch the – /+ to select and switch between different units: g/ml/oz. - Preparation
Place the sharing pot and filter cup, then press the [Power Button] to zero. 
Start Brewing Interface
Add your ground coffee, then tap the [Timer Button] to enter the brewing interface and start the automatic timer.- Start Brewing
Add liquid, and the timer will start automatically, with the flow rate displayed at the top.
Match Mode
- Enable Match Mode
Clear the weighing area, then press the [Power Button] to zero.
Hold – and + simultaneously for 2 seconds to enable Match Mode. - Set a Specific Sharing Cup
Place your designated sharing filter cup on the scale to enter its weight.
- Complete Setup
Hold [-] and [+] for 2 seconds. When the weight flashes and the machine beeps twice, the filter cup weight is successful y entered and the device automatically returns to Assist Mode. Add coffee grounds and press the [Timer Button] to brew. - Display Extracted Coffee Liquid Weight After completing the brewing in Assist Mode, remove the filter cup to display the coffee liquid weight.
- Disable Match Mode
Hold [-] and [+] simultaneously for 2 seconds to set the sharing pot weight to O.
NOTE:
Cleaning and Maintenance
- Coffee liquid can be corrosive. To prevent damage to the scale, please clean any residue from the weighing area promptly.
- Avoid washing the weighing area With water directly; use a damp cloth to wipe and clean the area to prevent corrosion from coffee liquid.
- Charging resets the scale to factory settings, clearing saved cup weights. To use Competition Mode again, you’ll need to re-input the cup weight manually.
- Low battery icon appears below 25%
. Charge soon to avoid power loss.
Questions?
If your product is defective and under warranty, please contact us at Email.
- Email: support@cocinare.com
- Phone: +1833 6551778(US)
- Available time:
Mon-Fri 9:00 am – 5:00 pm (PST/PDT)
Cocinare Offers a 12-Month Product Warranty.
6 MONTHSEXTENDED WARRANTY
Log in to cocinare.com within 3 months of purchase to extend your warranty to 18 months. Scan the QR code for registration or visit our official website.
@ Cocinarecoffee
Experience the charm of pour-over coffee with us! Follow for inspiring coffee gear content.
THANK YOU
Scan the QR code to access a more detailed electronic manual and additional language versions.
Documents / Resources
 |
Cocinare CES-223 Precision Coffee Scale [pdf] User Manual CES-223 Precision Coffee Scale, CES-223, Precision Coffee Scale, Coffee Scale, Scale |