COASTER 108440 Dining Table Installation Guide

COASTER 108440 Dining Table

Overview

This dining table is designed for home use and ships with numbered parts and hardware. Follow the provided assembly sequence to ensure fast and easy setup, and use the specified tools during assembly.

Specifications

• Item: 108440
• Product type: Dining Table
• Assembly time: 25 minutes
• Dimension tolerance: ± 5%

Quick Assembly Guide

1. Remove all hardware from the box and sort by size.
2. Verify that all hardware and parts are present before starting assembly.
3. Follow the attached instructions in the same sequence as numbered to assemble quickly and easily.
4. Step 1: Remove all screws and wood blocks before assembling.
5. Step 2: Remove all bolts, lock washers, and flat washers for this step, and use all hardware in Step 6.
6. Step 6: Use all bolts, lock washers, and flat washers in Step 2.
7. Complete assembly after finishing all numbered steps.

Tool note: A Phillips head screwdriver is required, but it is not provided by the manufacturer.

Troubleshooting

• Missing parts or hardware: Check that all hardware and parts are present before starting assembly, and sort hardware by size.
• Assembly confusion or incorrect fit: Ensure you are following the numbered instructions in order (the sequence is intended to assure fast & easy assembly).
• Broken or defective parts: Do not attempt to repair or modify broken/defective parts. Contact the store immediately.
• Loose/incorrect fastening due to step mix-ups: Re-check the step instructions for hardware usage (Step 2 hardware is used in Step 6; Step 6 requires using the hardware from Step 2).