CMP Paris VE6085 Luminous Atmosphere Diffuser
Product Usage Instructions
- Before using the Luminous Atmosphere Diffuser, please read all instructions and safety precautions provided in the user manual.
- Place the diffuser on a flat, stable surface.
- Connect the power source to the device.
- Ensure the diffuser is only used indoors.
Overview
Operation
- Turn on the diffuser using the power switch.
- Adjust the settings as desired for ambient lighting effects.
- Do not leave the diffuser unattended while in operation.
Maintenance
- Regularly clean the diffuser according to the manufacturer’s instructions to ensure optimal performance.
Instructions for use
- VE6085 – LIGHT-UP DIFFUSER IMPORTANT, RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.
- In order to ensure safe and adequate installation and use, as well as correct functioning of the product, be sure to follow these instructions carefully and keep them for future use.
Contents of the package
- 1 Diffuser
- 1 USB-C cable Main details:
- Dimensions: Ø 167 x 148 mm
- Input for: 5.0 V⎓ 1.0 A
- Functions with supplied cable
- Volume: 300 ml
Setting up
Installation
- Connect the cable to the entry port located under the base of the diffuser.
- Place the diffuser onto a flat, clean, dry and smooth surface. Lift the upper part in order to access the reservoir.
- Fill the reservoir with fresh water, without exceeding the 300 ml limit. Place the cover back on the diffuser base.
Starting up the device
- Connect the USB cable to a USB port on a computer or suitable power outlet.
- During the first time of use, the product will make beeps and the LED indicator will flash red, press the MIST button for 3 seconds.
- Press the MIST button to start the diffuser, to select the desired diffuser time (1, 3 or 6 hrs, ON = continuous) or to switch off the diffuser.
- Choose the diffuser power by holding down the MIST button. One beep will sound for strong diffusing, two beeps for light diffusing.
- Press the LIGHT button to start the LED lighting. You can change the lighting colour by pressing the LIGHT button (choice of 7 colours).
- The diffuser and LED light stop automatically when the water level is too low.
Warnings for use
- Do not use any other cable except the one supplied with the device.
- Take care not to open, modify or take apart the product.
- Taking the product apart may cause an electrical or fire risk.
- In the event of product malfunction, consult a specialist technician.
- Do not allow this product to be in contact with combustible materials or high levels of heat.
- Do not dispose of in fire or flames. Elevated rates of humidity may contribute to the development of biological organisms in the area.
- The area around the humidifier should not be wet or damp. In the event of dampness, reduce the humidifier output.
- Where it is not possible to adjust the humidifier output, only use the humidifier intermittently.
- Do not let absorbent materials such as rugs, curtains, wall coverings or tablecloths get damp.
- Unplug the device when filling or cleaning the tank.
- Micro-organisms that may be present in the water or in the environment in which the device is used or stored can develop in the water tank and can be diffused into the air, leading to very serious health risks if the water is not replaced and if the tank is not correctly cleaned every 3 days.
- Every 72 hrs, the product sounds to alert the user that it is necessary to change the water, press the MIST button for 3 seconds to stop the sound.
Cleaning and care
- Empty the reservoir and refill it again every three days.
- Before refilling, rinse the reservoir with tap water or clean it with cleaning products as per the manufacturer’s recommendations.
- Remove all lime scale, deposit or film which may have formed on the sides of the tank or on its interior surfaces, and wipe down all these surfaces.
- Do not use detergent as this risks damaging the product.
- Never leave water in the reservoir when the appliance is not being used.
- Empty and clean the humidifier before extended storage.
- Clean the humidifier before the next use.
DISPOSAL
This product constitutes electrical and electronic waste, which is harmful to the environment and to human health. It must not be disposed of with your household rubbish. Find out from your local authorities about the availability of recycling.
Symbols
 |
Complies with requirements stated by the community regulator |
 |
For indoor use only |
 |
Class III equipment |
 |
Direct current (DC) |
CONTACT
- Published by Groupe CMP – 157, avenue Charles Floquet – Bât. 4C/4D – 93150 Le Blanc-Mesnil – France www.cmp-paris.com-Madein China
FAQ
- Q: Can this diffuser be used with essential oils?
- A: No, this luminous atmosphere diffuser is designed for ambient lighting purposes only and should not be used with essential oils.
- Q: How do I dispose of this product?
- A: This product contains electrical and electronic waste. Please contact your local authorities for proper recycling methods to avoid harm to the environment and human health.
- Q: Is this diffuser suitable for outdoor use?
- A: No, this diffuser is designed for indoor use only. Do not expose it to outdoor elements to prevent damage.
Documents / Resources
 |
CMP Paris VE6085 Luminous Atmosphere Diffuser [pdf] Instructions VE6085 Luminous Atmosphere Diffuser, VE6085, Luminous Atmosphere Diffuser, Atmosphere Diffuser |