CLEANFIX 214578 Timer Instructions

214578 Timer
Instructions

Replace timer on Cleanfix control unit
In addition to this manual you will find a video tutorial on our website at: https://cleanfix.org/en/service/instructions-replace-timer

	1. Remove the Cleanfix cover.
	2. Remove the terminals from the plugs with a clamping pliers. 3. Cut off the cable tie with a side cutter.
	4. Unscrew nut and screws of the rear timer housing.
	5. Remove and dispose the front timer housing.
	6. Replace the new timer front housing.
	7. Connect the terminals to the new plugs again.8. Tie the electronic cables with cable ties 9. Shorten excess lengths of cable ties.
	10. Clip the Cleanfix cover back on.