CITAQ S1W05, S1W08 S1 Lite POS System
Specifications:
- Model: CITAQ S1 Lite POS SYSTEM
- Model Variants: S1W05~S1W08
- Electrical Parameters:
- OperativeVoltage: AC 100~240 V
- Operative Current: 1.5 A
- Operative Frequency: 50/60 Hz
- Standby Power: 0.5W
- Maximum Operating Power: 60 W
- Operating Temperature: 0-50°C
- Operating Humidity: 10% – 90%
- Product Dimension: W286*L205*H188 mm
- Net Weight: 3.4 kg
- Package Dimension: L395*P270*H265 mm
- Gross Weight: 4.2 kg
Product Usage Instructions
Installation:
Display Installation:
- Connect the power plug into the motherboard interface and then connect the adapter.
- Press the power switch button once to power on the device.
Installing the Paper Roll:
Press the ‘paper bin handle’ upwards to open the printer paper bin. Install the paper roll correctly as shown in the diagram provided.
Product Dimensions:
| 11.6 Inch | 13.3 Inch | |
|---|---|---|
| Product Size (L*W*H) | 286*205*188 mm | 323*208*191 mm |
FAQ
Q: What are the recommended operating conditions for the CITAQ S1 Lite POS SYSTEM?
A: The device is recommended for use in environments with an operating temperature between 0-50°C and humidity levels ranging from 10% to 90%.
Q: How do I power on the system?
A: Press the power switch button once to light up the display screen and enter the system.
Q: How do I install the paper roll?
A: Press the ‘paper bin handle’ upwards to open the printer paper bin, and correctly install the paper roll as per the provided diagram.
Please read this manual carefully before using device.
PACKAGE CONTENT
Kindly find below items when opening carton
Product parameters
Note: The data is subject to the actual configuration.
Detailed configuration parameters
Installation Notes
PRODUCT PROFILE
Product Interface
- Press the “power switch” button once, the display screen will light up and enter the system.
Insert the power plug into the motherboard interface and then connect the adapter.
Installing the paper roll
Press the ‘paper bin handle’ upwards to open the printer paper bin, and install the paper roll correctly as shown in the diagram.
- Correctly install the paper roll
- Wrong paper roll installation
Dimensions
Unit:mm
FCC Statements
The company is not responsible for the following actions. Damage caused by use and maintenance without the conditions described in this guide;
The company will not be responsible for any damages or problems caused by the alternatives or consumables (not the original products or approved products provided by the company). Without consent of the company. It is not authorized to make product modifications or changes.
Disclaimer
Due to product updates, some details of this document may not match the product, please refer to the actual product, and the right to interpret this document belongs to the company. The right to modify this guide without prior notice is reserved.
In the living environment, this product may cause radio interference.
This machine is only suitable for safe use in areas below 5000 meters and only for safe use in non-tropical climates.
Product standards and technical requirements: GB 4943.1-2022; GB/T 9254-2021 (Class A).
This device complies with the basic recommendations and other relevant measures in the 2014/30/EU and 2014/35/EU directive.
This symbol means that it is forbidden to dispose the product of with normal household waste. At the end of the product life cycle, waste equipment should be taken to designated collection points, returned to the distributor when purchasing a new product, or contact your local authority representative for detailed information on WEEE recycling.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Incr ease the se paration between the equipment and receiver.
- Connect the equipment in to an outlet on a circuit different from t hat to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Manufacturer: CITAQ CO.,LTD.
Tel: 86-754-88990429
Website: www.citaqpos.com
Address:9th,13th floor, No. 6 Keji Middle Road, High-tech zone, Shantou, Guangdong
Documents / Resources
 |
CITAQ S1W05, S1W08 S1 Lite POS System [pdf] User Manual S1W05, S1W08, S1W05 S1W08 S1 Lite POS System, S1W05 S1W08, S1 Lite POS System, Lite POS System, POS System, System |