CISCO-logo

CISCO Table Microphone Pro

CISCO-Table-Microphone-Pro-product-image

Installation Guide

CISCO-Table-Microphone-Pro-image-48

  • https://www.cisco.com/go/offices | 78-101799-01B0
  • Cisco Systems Inc., Corporate Headquarters, 170 West Tasman Dr., San Jose, CA 95134, USA.
  • © 2023 Cisco Systems, Inc. All rights reserved.

Microphone placement and orientation

CISCO-Table-Microphone-Pro-image-1

  • Place microphones between people; not directly in front of a person.CISCO-Table-Microphone-Pro-image-2
  • For microphones placed along the table centerline, the arrow should point away from the screen. If not placed along the centerline, the arrow should point toward the sides where people are sitting.

Removing the cable coverCISCO-Table-Microphone-Pro-image-3

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

CISCO-Table-Microphone-Pro-image-41

Installation Guide

CISCO-Table-Microphone-Pro-image-26

CISCO-Table-Microphone-Pro-image-5

  • Step 1
    CISCO-Table-Microphone-Pro-image-6Plan where to place the microphones before you begin. Read about Microphone placement and orientation in the frame above.
  • Step 2

CISCO-Table-Microphone-Pro-image-7

  • Step 3CISCO-Table-Microphone-Pro-image-8
  • Step 4
    CISCO-Table-Microphone-Pro-image-9
  • Step 5
    CISCO-Table-Microphone-Pro-image-10
  • Step 6
    CISCO-Table-Microphone-Pro-image-11
  • Either connect the microphone to a Poe port on the Cisco collaboration device, or to a Poe port on a switch that is connected to the Cisco collaboration device

CISCO-Table-Microphone-Pro-image-12www.cisco.com/go/table micro-installation

  • Find more information on how to use the Table Microphone Pro with a Cisco device on this site

CISCO-Table-Microphone-Pro-image-27CISCO-Table-Microphone-Pro-image-13CISCO-Table-Microphone-Pro-image-22

  • Step 1
    CISCO-Table-Microphone-Pro-image-6
    • Plan where to place the microphones before you begin. Read about Microphone placement and orientation on the other side of the sheet
  • Step 2CISCO-Table-Microphone-Pro-image-28
  • Step 3
    CISCO-Table-Microphone-Pro-image-29CISCO-Table-Microphone-Pro-image-30
  • Step 4
    CISCO-Table-Microphone-Pro-image-9CISCO-Table-Microphone-Pro-image-21

Either connect the microphone to a Poe port on the Cisco collaboration device, or to a Poe port on a switch that is connected to the Cisco collaboration device

CISCO-Table-Microphone-Pro-image-31CISCO-Table-Microphone-Pro-image-32CISCO-Table-Microphone-Pro-image-33

Plan where to place the microphones before you begin. Read about Microphone placement and orientation on the other side of the sheetCISCO-Table-Microphone-Pro-image-34 CISCO-Table-Microphone-Pro-image-35

step 3
CISCO-Table-Microphone-Pro-image-36CISCO-Table-Microphone-Pro-image-37CISCO-Table-Microphone-Pro-image-39 CISCO-Table-Microphone-Pro-image-40

Either connect the microphone to a Poe port on the Cisco collaboration device, or to a Poe port on a switch that is connected to the Cisco collaboration device

Documents / Resources

CISCO Table Microphone Pro [pdf] Installation Guide
Table Microphone Pro, Table, Microphone Pro, Pro

References

Leave a comment

Your email address will not be published. Required fields are marked *