CISCO logoCATALYST CX Dual Channel Amplifiers
User Guide

CATALYST CX Dual Channel Amplifiers

Factory Reset: Press and hold B and MANUAL while powering on
NEW 2.0 UPDATE

CISCO CATALYST CX Dual Channel Amplifiers - EFFECT MODELS 1Turn over to see the feature specifications

AMP MODELS
Select one of six amp voicings from group 1 or 2 using the SELECTOR knob CISCO CATALYST CX Dual Channel Amplifiers - AMP MODELS

EFFECT MODELS

  1. Press TAP button to switch categories
  2. Press and hold EFFECT 1 or 2 button to enter selection mode
  3. Turn the SELECTOR knob to select the desired effect model
  4. Press EFFECT 1 or 2 button again to lock selection and exit

CISCO CATALYST CX Dual Channel Amplifiers - EFFECT MODELSAMP GROUP SELECTION
CISCO CATALYST CX Dual Channel Amplifiers - iconCISCO CATALYST CX Dual Channel Amplifiers - icon Press A and B simultaneously to switch between Amp Groups 1 and 2
SAVE CHANNEL
CISCO CATALYST CX Dual Channel Amplifiers - icon 10 Hold either channel button A or B until you see the lights blink to save
MANUAL MODE
CISCO CATALYST CX Dual Channel Amplifiers - icon 2 Press MANUAL to use manual mode – what you see is what you get
BANK SELECTION
CISCO CATALYST CX Dual Channel Amplifiers - icon 3 Press and hold MANUAL and use the SELECTOR knob to access six banks of preset channels
SOFTWARE
CISCO CATALYST CX Dual Channel Amplifiers - icon 4 The Catalyst Edit free software lets you adjust deep edit parameters and save/organize your presets

SPECIFICATIONS

CISCO CATALYST CX Dual Channel Amplifiers - icon 5 12 Amp Voicings Models taken from the Helix® family of products
CISCO CATALYST CX Dual Channel Amplifiers - icon 6 Boost Custom matched to each amp design
CISCO CATALYST CX Dual Channel Amplifiers - icon 7 Built-In Effects 24 effects taken from the Helix® family of products
CISCO CATALYST CX Dual Channel Amplifiers - icon 8 Traditional Controls Primary controls immediately recognizable
CISCO CATALYST CX Dual Channel Amplifiers - icon 9 Tap Tempo/Tuner Set time-based effects or activate the onboard tuner
Optional LFS2 Footswitch Change channels, effects, banks, and more

CATALYST
DUAL-CHANNEL AMPLIFIERS FEATURING 12 AMP VOICINGS TAKEN FROM THE HELIX® FAMILY OF PRODUCTSCISCO CATALYST CX Dual Channel Amplifiers - PRODUCTS

CISCO CATALYST CX Dual Channel Amplifiers - icon 10 XLR Output Pro connection for stage and recording
CISCO CATALYST CX Dual Channel Amplifiers - icon 11 Effects Loop Insert external effects
CISCO CATALYST CX Dual Channel Amplifiers - icon 12 Power Amp In Connect your favorite modeler
CISCO CATALYST CX Dual Channel Amplifiers - icon 13 Power Level Control Consistent tone at any volume
CISCO CATALYST CX Dual Channel Amplifiers - icon 14 USB Interface Connect to Catalyst Edit app or record direct
CISCO CATALYST CX Dual Channel Amplifiers - icon 15 MIDI* Receive channel/preset and CC messages *USB MIDI only on Catalyst CX 60

© 2023 Yamaha Guitar Group, Inc.
All rights reserved. Line 6, the Line 6 logo, HELIX, CATALYST, and the CATALYST logo are registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions.

CISCO logo

Documents / Resources

CISCO CATALYST CX Dual Channel Amplifiers [pdf] User Guide
CATALYST CX Dual Channel Amplifiers, CATALYST CX, Dual Channel Amplifiers, Channel Amplifiers, Amplifiers

References

Leave a comment

Your email address will not be published. Required fields are marked *