CIPHERLAB QBIT2 POS Scanner
IMPORTANT NOTICES
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Note:
The country code selection is for non-US models only and is not available to all US models. Per FCC regulation, all WiFi products marketed in US must fixed to US operation channels only.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Find the certificate information from:
Setup TO About Phone TO Regulatory information
SAFETY PRECAUTIONS
- DO NOT expose the device to any flammable sources.
- Under no circumstances, internal components are self-serviceable.
- For AC power adaptor, a socket-outlet shall be installed near the equipment and shall be easily accessible. Make sure there is stable power supply for the scanner or its peripherals to operate properly.
CARE & MAINTENANCE
- Use a clean cloth to wipe dust off the scanning window and the body of the scanner. DO NOT use/mix any bleach or cleaner.
- If finding the device malfunctioning, write down the specific scenario and consult the local sales representative.
INTRODUCTION
Integrated with a touch display, thermal printer, 2D barcode reader, front camera, wireless connectivity (Bluetooth & 802.11 a/b/g/n), etc., the QBit Self-Ordering POS device is capable of delivering user experience. This manual serves to guide you through how to install, configure, and operate the device. We recommend that you keep one copy of the manual at hand for quick reference or maintenance purposes. To avoid any improper disposal or operation, please read the manual thoroughly before use. Thank you for choosing CipherLab products!
INSIDE THE PACKAGE
- QBit Self-Ordering POS
- Power cord
- Magnet button
- Thermal paper roll (optional)
- Paper roll holder
- Quick Start Guide
Save the box and packaging material for future use in case it is need to store or ship the device.
PRODUCT HIGHLIGHTS
- 10.1″ Touchscreen
- Front camera (8M pixels)
- Embedded 2D barcode scanner
- 2 x USB 2.0 Type-A
- 1 x Micro USB
- Android 8.x
- Wi-Fi 2.4G: 802.11 b/g/n & 5G: 802.11 a/n/ac
- Bluetooth (Bluetooth 4.1 Low Energy (LE), 3.0+HS, 2.1+EDR)
- 10/100 BaseT(X)
- Thermal printer
SPECIFICATION
|
Physical Features |
|
| Dimensions | 394.5mm(W)x346.5mm(H)x159.34mm(D) |
| Weight | 6.6 Kg ± 250g |
| Touch Display | 10.1” TFT FHD |
| Data Capture | 2D barcode reader |
| LED Indication | 3-color LED indicator x 2 |
| Speaker | Built-in 5W |
| I/O Port | USB 2.0 Type-A x 2 |
| 10/100 BaseT(X) x 1 | |
| Expansion Slot | Micro SD x 1 (SDHC up to 32GB, SDXC up to 2TB) |
| SIM x 1 (2G/3G/4G/Data only micro SIM card) | |
| SAM x 1 (compatible with SIM2):
– SIM x 2 or – SIM x 1 + SAM x 1 |
|
|
Performance Characteristics |
||
| CPU | Qualcomm SDM450 Qcta-core 1.8GHz | |
| Operating System | Android 8.x | |
| Memory | RAM | 2G |
| ROM | 16GB eMMC MLC (TLC not acceptable) | |
|
Data Capture |
|
| Barcode Reader | 1D/2D barcodes |
| Camera | 8M pixels |
|
Wireless Communications |
|
| WLAN | 2.4G: 802.11 b/g/n |
| 5G: 802.11 a/n/ac | |
| Bluetooth | – Bluetooth 2.1+EDR
– Bluetooth 3.0+HS – Bluetooth 4.1 Low Energy (LE) – Bluetooth Class II |
|
Electrical Characteristics |
|
| Input Voltage | Vac: 85 ~ 264V, 47 ~ 63 Hz |
|
Environmental Characteristics |
||
| Temperature | Operating
Storage |
0 °C to 40 °C
-20 °C to 60 °C |
| Humidity
(Non-condensing) |
Operating
Storage |
10% to 90%
5% to 95% |
|
Resistance |
|
| Electrostatic Discharge | ± 15 kV air discharge, ± 8 kV contact discharge |
Documents / Resources
 |
CIPHERLAB QBIT2 POS Scanner [pdf] User Guide QBIT2, Q3N-QBIT2, Q3NQBIT2, QBIT2 POS Scanner, QBIT2, POS Scanner |
