Cignias Technology WTS-06 Wireless Timer Switch Controller User Manual

Cignias Technology WTS-06 Wireless Timer Switch Controller

Product Overview

This wireless RF timer outlet set uses 2.4GHz wireless technology for remote and timer control of household appliances.

Package Contents:

• 1 Controller (with rechargeable battery)
• 1 Smart Plugs (pre-paired)

Key Features:

• Control up to 19 plugs per controller.
• Single plug can be controlled by multiple controllers.
• Timer, countdown, and random modes.
• Real-time power consumption monitoring.
• 120m wireless range (open space).

Technical Specifications

Actual distance depends on wall material and thickness.

Display Icons

Button Functions

Button Layout

Detailed Functions

Initial Setup Guide

Step 1: Charging

• 1.Connect the Type-C charging cable to controller.
• 2. Use 5V/1A adapter for charging.
• 3. Battery icon will scroll during charging.
• 4. When full, battery icon shows full bars and stops scrolling.

Step 2: Plug Connection

• 1.Insert plugs into wall outlets.
• 2. Connect appliances to corresponding plugs.
• 3. Confirm plugs are powered (indicator light on).

Step 3: Verify Connection

• 1. Turn on controller, screen shows current time.
• 2. Press KIT to see device numbers.
• 3. Press ON/AUTO/OFF to test control functions.

Basic Operations

A. Time Setting

Steps:

1. Set Weekday
   • Hold CLOCK + press WEEK to select current weekday
2. Set Time
   
   • Hold CLOCK + press HOUR to set hour
   • Hold CLOCK + press MINUTE to set minutes
   • Hold CLOCK + press SEC/RES to set seconds
3. Exit Setup
   • Release the CLOCK button to automatically confirm and exit the time setting.

Special Settings:

• 12/24-hour toggle:
  Hold CLOCK + press TIMER
• DST setting:
  Hold CLOCK + press ON/AUTO/OFF

B. Manual Control

Mode Description:

Operation:

1. Press KIT to select device to control.
2. Press ON/AUTO/OFF to switch modes.
3. Observe device status on screen.

C. Timer Setup

Basic Timer (Up to 19 timers per device):

1. Enter Timer Mode
   • Press TIMER to enter, the timed TMR icon and group number flash simultaneously
2. Select Days
   • Press WEEK to select weekday or combination (e.g., Mon-Fri)
3. Set ON Time
   • Use HOUR and MINUTE to set ON time
4. Set OFF Time
   • Press TIMER again to switch to the group’s OFF time
   • Use HOUR and MINUTE to set OFF time
   • Once the settings are completed, they will be automatically saved
5. Exit Setup
   • After setting up, press CLOCK to exit
   • If the TMR and the AUTO icon is constantly displayed at this time, it indicates that the timer has taken effect

Important Notes:

• Ensure ON/OFF times don’t overlap, If overlapping, only execute the last one.
• Switch to AUTO mode after setup, timed execution.
• Press TIMER to review set timers
• Short press SEC/RES to delete the currently set single timer, press again to restore
• Long press SEC/RES for 8 seconds in timer mode to clear all current device timers (this operation cannot be undone)

Advanced Features

A. Countdown Timer

Setup Steps:

1. Enter Countdown
   • Long press C/D to enter countdown setup
2. Set Duration
   • HOUR: Set hours
   • MINUTE: Set minutes
   • SEC/RES: Set seconds
3. Select End Action
   • Select the action to be executed after the countdown ends using ON/AUTO/OFF
4. Start Countdown
   • Press C/D to start countdown
   • Short press C/D during countdown to pause/resume
5. Stop Countdown
   • Press CLOCK to stop and exit

Note:
Only one device can run countdown at a time

B. Copy Timer Settings

Quickly copy all timers to other devices:

1. Prepare Copy
   • Press TIMER to enter timer mode
   • Use KIT to select source device (with timers set)
2. Activate Copy Mode
   • Long press CPY for 3 seconds until COPY icon flashes
3. Select Target Device
   • Use KIT to select target device
4. Execute Copy
   • Short press CPY to complete copy
   • Repeat steps 3-4 to copy to multiple devices
5. Exit Copy Mode
   • Press CLOCK to exit, COPY icon disappears

Note:

In copy mode, the timing cannot be changed

C. Anti-theft Random Mode

Function Description:

• Only works for timers between 18:00-06:00
• Randomly delays 2-32 minutes from set time
• Simulates natural occupancy for security

Usage:

1. Set Timer
   • First set timers between 18:00-06:00
2. Activate Random
   • Press RANDOM to enable (icon appears)
   • Ensure device is in AUTO mode
3. Important Notes
   • Activate RANDOM at least 30 minutes before timer
   • Space multiple random timers at least 31 minutes apart

D. Power Monitoring

View Power Consumption:

• Short press KWh to toggle:
  • Current device power consumption
  • Total power of all devices

Reset Power Records:

1. Select Device
   • Use KIT to select device to reset
2. Enter Reset Mode
   • Long press KWh until value flashes
3. Confirm Reset
   • Short press SEC/RES to confirm reset (irreversible)

Note:

Reset operation cannot be undone, proceed with caution

Device Management

A. Adding New Plugs

Pairing Steps:

1. Prepare Controller
   • Long press KIT until KIT icon flashes
2. Prepare Plug
   • Power on the plug (insert into wall outlet)
3. Confirm Pairing
   • Pairing complete when KIT icon stops flashing and shows device number

B. Remove Plugs

Removal Steps:

1. Select Device
   • Use KIT button to select device to remove
2. Execute Removal
   • Press and hold KIT + SEC/RES for about 10 seconds
   • Device number disappears when successfully removed

C. Device Management Notes

Capacity Limits:

• Each controller: Control up to 19 plugs
• Each plug: can be controlled by multiple controllers

Factory Settings:

• Kit plugs are pre-paired
• Ready to use without re-pairing

Safety Guidelines

Important Safety Reminders

Electrical Safety:

• Do not exceed max load (Resistive load): 16A/2000W.
• Not waterproof, keep away from water/moisture.
• Indoor use only.
• Regularly check plug and appliance connections.

Usage Safety:

• Fully charge before first use.
• Charge when low battery (battery icon flashing).
• Do not disassemble or modify.
• Keep away from children and pets.

Maintenance Tips:

• Clean controller screen regularly.
• Avoid extreme temperatures.
• Pay attention to regularly checking the equipment status.
• Charge before long-term storage.

FAQ & Troubleshooting

Frequently Asked Questions

Q1: How to know if device is online?

A1: When device is offline, Signal icon will flash; When the device is online, the signal icon is often displayed.

Q2: Why didn’t the timer execute?

A2: Check: 1) Clock settings correct; 2) Device in AUTO mode; 3) Random mode causing delay; 4)Device disconnection; 5) Panel power shortage.

Q3: How many timers can be set simultaneously?

A3: Up to 19 timer groups per device, each group has one ON and one OFF time.

Troubleshooting Guide

Connection issues

Problem: Device shows offline

Solutions:

1. Move controller closer to plug (within 30m).
2. Check if plug is powered.
3. Re-pair the device.
4. Check for electromagnetic interference.

Timer Issues

Problem: Timer inaccurate

Solutions:

1. Reset current time and date.
2. Check daylight saving time settings.
3. Confirm no overlapping timers.
4. Check if random mode is affecting.

Power issues

Problem: Abnormal power readings

Solutions:

1. Reset power records and monitor again.
2. Confirm appliance power within rated range.
3. Check plug connection quality.

Operation Issues

Problem: Buttons not responding

Solutions:

1. Check battery level and charge if needed.
2. Check if the buttons are deformed due to external impact.

Contact Support

If problems persist, contact technical support.

• Provide product model and purchase date.
• Describe problem in detail.

Appendix: Quick Reference Card Status Indicators

Indicator	Meaning
Signal icon flashing	Equipment disconnection, uncontrollable
Battery flashing	Low power, needs charging
Three grid scrolling display of battery icon	Charging
Battery full, not flashing	Sufficient power
KIT icon flashing	Device pairing mode
TMR icon flashing	Timer function active
TMR and AUTO icon display	Timer function activation
RANDOM icon showing	Random mode enabled
DST icon display	The current clock is daylight saving time
AM/PM icon display	The time is in 12 hour format
KWh icon flashing	Prepare to reset the battery level to zero

Status Indicators Common Operations Quick Reference

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and.
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.