CETRONIC - logo

HC-SR05 ULTRASONIC SENSOR CETRONIC Ultrasonic Sensor HC-SR05

USER MANUAL
CETRONIC Ultrasonic Sensor HC-SR05 icon

Introduction

To all residents of the European Union Important environmental information about this product
CETRONIC Ultrasonic Sensor HC-SR05 icon1This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman®! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.

 Safety Instructions

CETRONIC Ultrasonic Sensor HC-SR05 icon2This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.
CETRONIC Ultrasonic Sensor HC-SR05 icon4 Indoor use only.
Keep away from rain, moisture, splashing, and dripping liquids.

 General Guidelines

CETRONIC Ultrasonic Sensor HC-SR05 icon5

  • Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
  •  Familiarise yourself with the functions of the device before actually using it.
  • All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
  • Only use the device for its intended purpose. Using the device in an unauthorized way
    will void the warranty.
  • Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
  • Nor Velleman NV nor its dealers can be held responsible for any damage (extraordinary, incidental, or indirect) – of any nature (financial, physical…) arising from the possession, use, or failure of this product.
  •  Due to constant product improvements, the actual product appearance might differ from the shown images.
  •  Product images are for illustrative purposes only.
  • Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device against damage by leaving it switched off until it has reached room temperature.
  •  Keep this manual for future reference.

Overview

The ultrasonic distance sensor provides an easy way for your projects to measure distances up to 4.5 m.

Arduino® VMA306
+5 V CETRONIC Ultrasonic Sensor HC-SR05 icon6 VCC
D4 CETRONIC Ultrasonic Sensor HC-SR05 icon6 ECHO
D2 CETRONIC Ultrasonic Sensor HC-SR05 icon6 TNG
GND CETRONIC Ultrasonic Sensor HC-SR05 icon6 GND
voltage
.sound frequency
measurement resolution
measurement angle
supply current.
trigger pin format
connect
detection distance
dimensions
……… 4.5 to 5.5 VDC
………….. 40 KHz
………… 0.3 cm
………… 15°
………. 10 to 40 mA
………….. 10 µS pulse
………. 5-pin male
………. 2 to 450 cm
45 x 20 x 13 mm

Use this device with original accessories only. Velleman NV cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.Velleman.EU. The information in this manual is subject to change without prior notice.

CETRONIC Ultrasonic Sensor HC-SR05 fig

Title ultrasonic      

Size

A4

Number Revision REV01
Date: 2018 Sheet    of
File: F:\.\ultrasonic.SchDoc Drawn By: Jie Liang mo

Documents / Resources

CETRONIC Ultrasonic Sensor HC-SR05 [pdf] User Manual
Ultrasonic, Sensor, HC-SR05

References

Leave a comment

Your email address will not be published. Required fields are marked *