cell2 02180151 High Gradient Windshield Shroud Kit User Manual
INSTALLATION
- Assemble the lighthead to the plastic shroud with the rubber backing.
- Adjust the angle of the lighthead before fixing it with the provided machine screws (ensure that they are on the same level).
- Choose a mounting area on the windshield that is clear from obstruction to view or interference with driving.
- Clean the mounting area thoroughly with alcohol and remove tape backings before mounting.
- Press the assembly firmly againest the windshield for 1 minute to complete the installation.
- Make wiring according to the lighthead manual.
NOTE: Lightheads may be oriented with cable exiting to the left or to the right of the rear shroud.
CAUTION: Recommended torque force @ 1.5~2.5Kgf-cm
ADJUSTABLE ANGLE
The angle of ligh the ad is adjustable with 55 degree at most for optimum warning efficiency
Horizontal marking that indicates level of adjustment.
Documents / Resources
 |
cell2 02180151 High Gradient Windshield Shroud Kit [pdf] User Manual 86-M5910-0311.0, 02180151 High Gradient Windshield Shroud Kit, 02180151, High Gradient Windshield Shroud Kit, Windshield Shroud Kit |
