CREALITY Ender-3 S1 High Flow Kit

Packing List

Toolkit

• Isolated column x2
• Wrench x2
• 0.6mm nozzle x1
• M3 gasket x4
• M3*14 screws x4
• M3*20 screws x2
• M2*12 screws x2

Installation Steps

Please print the fan cover model first, the download address of the fan cover model： https://vip.creality.com/en/goods-detail/1840

1. Remove the original hotend and fan
2. Install the high flow hotend kit and 5015 blower fan (the fan can be adjusted up and down)

www.cXSW3d.com
400 6133 882 0755-8523 4565
SHENZHEN CREALITY 3D TECHNOLOGY cO., LTD.
Add: 18F, JinXiuHongDu Building, Meilong Blvd.,
Longhua Dist., Shenzhen, China 518131
Official Website: www.creality.com Tel: +86 755-8523 4565
E-mail: info@creality.com cs@creality.com

Documents / Resources

CREALITY Ender-3 S1 High Flow Kit [pdf] User Manual Ender-3 S1 High Flow Kit, Ender-3 S1, High Flow Kit, Flow Kit

References

• User Manual