Sanag G6S / G6S AI True Wireless Stereo Bluetooth Earphones
User Guide
Product Overview
This document provides a user guide for the Sanag G6S / Sanag G6S AI True Wireless Stereo Bluetooth Earphones.
Key Components:
- Touch Key: The primary control interface on the earbuds.
- Indicator Light: Provides status information.
Key Function Operation
- Power On: 1. Open the charging case; earbuds power on automatically. 2. Long press the touch control button for 3 seconds for manual power on.
- Power Off: 1. Place earbuds into the charging case; they power off automatically. 2. Long press the touch control button for approximately 7 seconds.
- Pairing: Earbuds automatically enter pairing mode after powering on (ready to connect to a phone).
- Answer Call: When a call comes in, single tap the touch control button on either earbud.
- Hang Up Call: During a call, double tap the touch control button on either earbud.
- Reject Call: When a call comes in, long press the touch control button on either earbud for 2 seconds.
- Play / Pause: Single tap the touch control button on either earbud. ▶️ / ⏸️
- Previous Track: Double tap the touch control button on the left earbud. ⏪
- Next Track: Double tap the touch control button on the right earbud. ⏩
- Volume Up: Triple tap the touch control button on the left earbud. ?
- Volume Down: Triple tap the touch control button on the right earbud. ?
- Voice Assistant: Long press the touch control button on either earbud for 3 seconds to activate the voice assistant. Single tap to exit. ?️
- Reset Earbuds: When not connected to a phone, five taps on the touch control button of either earbud will reset the earbuds to factory settings. They will automatically shut down after a successful reset. ⚙️
- Game Mode / Music Mode: Quad tap the touch control button on either earbud to enter low latency (Game) mode. Quad tap again to switch back to Music Mode. ? / ?
- Low Power Alarm: When the earbud battery is low, a warning tone will sound every 3 minutes. ⚠️
- Charging: Place earbuds in the charging case and close the cover. The charging case will charge the earbuds. The indicator light on the case will be solid ice blue for 4 seconds then turn off. To charge the case itself, the ice blue light will flash while charging and remain solid when fully charged. ?
Bluetooth Operation
Bluetooth Connection
- 1. Ensure earbuds are in Bluetooth mode. On your phone, search for the Bluetooth pairing name "sanag G6S / sanag G6S AI" and tap to connect.
- 2. The earbuds will automatically reconnect to the last paired device by default. ✔️
Bluetooth Disconnection
- 1. Manually turn off Bluetooth on your phone; the earbuds will enter pairing mode.
- 2. If the earbuds disconnect due to being out of range, they will attempt to reconnect automatically if you return within the effective range within 5 minutes. If the range is exceeded for more than 5 minutes, the earbuds will shut down automatically. ❌
Specifications
- Name: OWS Bluetooth Headset
- Model: sanag G6S / sanag G6S AI
- Bluetooth Version: V5.3
- Connection Range: ≥10m
- Headphone Battery Capacity: 35mAh
- Charging Box Battery Capacity: 370mAh
- Charging Voltage: 5V - 1A MAX
Attention
? Please observe the following precautions:
- Do not use abrasive cleaners to clean this product.
- Do not expose this product to heat or place it near fire sources, such as cooking stoves.
- Do not expose the product to direct sunlight for extended periods.
- Do not discard this product in fire to prevent explosion.
- Do not attempt to disassemble or modify this product, as it contains no user-serviceable parts.
- Do not use this product in the rain.
- If the product will not be used for a long time, store it in a dry environment and charge the earbuds at least once a month to prolong their lifespan and avoid extreme temperatures and dust.
Electronic Information Product Harmful Substance Statement
This table is compiled according to SJ/T 11364 regulations.
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBBs) | Polybrominated Diphenyl Ethers (PBDEs) |
|---|---|---|---|---|---|---|
| PCB | Ο | Ο | Ο | Ο | Ο | Ο |
| Plastic | Ο | Ο | Ο | Ο | Ο | Ο |
| Accessories | Ο | Ο | Ο | Ο | Ο | Ο |
Legend:
Ο: Indicates that the content of the hazardous substance in all homogeneous materials of this part is within the limit requirements specified by GB/T 26572.
X: Indicates that the content of the hazardous substance in at least one homogeneous material of this part exceeds the limit requirements specified by GB/T 26572.
Note: The '5' symbol refers to the "Environmental Protection Use Period", not the product quality warranty period. Electronic products contain hazardous substances such as lead, mercury, and cadmium. If used beyond this period, these substances may leak or change, causing environmental pollution or serious harm to people and property. The "Environmental Protection Use Period" means that all electronic products must be used within this effective period; after exceeding the safe service life, the company is not responsible for product quality issues.
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. ⚠️
