XUANNA RC cars include models 655-40 and 655-41, with manuals covering rechargeable batteries, charging, remote control setup, safe operation, and troubleshooting.
XUANNA remote-controlled car manuals cover models including the 655-40 and 655-41, with guidance on batteries, charging, remote control setup, and troubleshooting.
Check your model number before following charging instructions, as battery arrangements differ between models. For warranty or service assistance, consult the product packaging or contact your seller.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Available instructions cover RC car models 655-40 and 655-41. Match the model number on your car or packaging before using the guide.
The 655-40 uses one 3.7V rechargeable lithium battery. The 655-41 has a built-in, non-removable 3.7V lithium battery. Both remote controllers use two 1.5V AA batteries, not included.
Use safety-compliant charging equipment with DC 5V output. Connect the charging station USB port to the charger, then insert its circular socket into the charging port on the side of the car.
Confirm that two 1.5V AA batteries are installed correctly in the remote controller. Refer to the model-specific manual for further setup guidance.
An official XUANNA support or registration page has not been verified. Check the documentation supplied with your car or contact the seller for assistance.