Xuanlongyuan offers wireless relay switches, RF remote controls, motor controllers and vibration reminder systems for remotely operating electrical equipment.
Xuanlongyuan products include wireless relay switches, RF receivers and transmitters, motor controllers and vibration reminder systems for remotely operating electrical equipment.
Browse manuals for wiring, power requirements, remote pairing, code clearing and operating modes. Always match your model number and voltage rating to the guide before installation or setup.
For warranty or purchase-related assistance, consult your product documentation or contact the seller.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Match the model number on your receiver, transmitter or product label to the manual. Also check the voltage rating and channel count, as wiring and setup vary by model.
For the receiver covered by this guide, press the learning button twice for Jog, three times for Self-locking or four times for Interlock. When the LED stays on, press the transmitter button. Rapid LED flashing indicates successful pairing. Check your model's manual before using this sequence.
Press and hold the receiver's learning button until the LED turns on and flashes rapidly. This clears all paired codes on the receiver described in the guide; other models may use different procedures.
No verified official warranty or registration page is available in the supplied information. Check the paperwork included with your product or contact the seller for applicable terms and assistance.