V2 SPA (V2 S.p.A.) produces advanced residential and industrial automation systems, specializing in secure gate motors, garage openers, and remote transmitters.
V2 SPA (Società per azioni) is an established Italian manufacturer that specializes in home and industrial automation systems. The company provides a wide array of products including automated gate operators, garage door systems, traffic barriers, and advanced electronic control solutions. Their remote control transmitters, such as the V2 PHOX, are widely recognized for their secure rolling code technology and ease of programming.
Whether you are an installer setting up a new slider motor or a homeowner needing to program a replacement remote control, following the manufacturer's precise procedures is critical. Our repository provides V2 SPA user manuals, installation guides, and programming instructions to help you successfully configure and maintain your gate and garage automation systems.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Locate the receiver on your gate motor. Press the P1 button until the L1 LED illuminates, then release it. Within 5 seconds, press the button on the remote you wish to use. The LED will turn off and on again to confirm the code was memorized.
Yes, stand within 1-2 meters of the motor. Press buttons 1 and 2 (closest to the LED) on the original working remote for 6 seconds, and release them. Within 5 seconds, press the desired button on your new remote for 2-3 seconds to pair it.
Switch off the power supply to the control unit where the receiver is connected. Press and hold the P1 key on the receiver, then restore power while continuing to hold P1. Release the key once the LED light illuminates.
Wiring diagrams and board schematics are located in the installation manual specific to your V2 control unit model, available on our site or the official V2 website.