Turnigy manufactures industry-leading RC power systems, including LiPo batteries, electric motors, chargers, speed controllers (ESCs), and remote accessories.
Turnigy is a globally recognized brand specializing in radio control (RC) power systems and accessories. Developed and distributed primarily through HobbyKing, Turnigy offers an extensive lineup of high-performance products designed for RC enthusiasts. Their product catalog includes advanced LiPo batteries, brushless electric motors, sensitive electronic speed controllers (ESCs), precision balance chargers, and robust 2.4GHz radio systems.
From fixed-wing airplanes and racing drones to RC cars, boats, and electric skateboards, Turnigy provides reliable and affordable electronics for every type of modeler. Their power systems are reputed for delivering superior protection against interference, efficient battery life management, and highly adaptive PWM controls.
Our library provides comprehensive manuals and setup guides for Turnigy products. Whether you are calibrating a new Plush-32 Series ESC, binding an AFHDS surface radio, or configuring safety limits on your Skateboard ESC, these manuals give you the step-by-step instructions needed to ensure safe and optimized performance.
Latest manuals from manuals+ curated for this brand.
Do you have a setup manual or guide for a Turnigy ESC, charger, or radio? Upload it here to help fellow RC hobbyists!
Common questions about manuals, registration, and support for this brand.
You can download user manuals and setup guides for Turnigy ESCs, radios, and chargers directly from our library, or find the latest firmware and documents on the official HobbyKing website.
Power on your controller and move the throttle stick to the highest position. Next, power on the ESC until the motor beeps. Finally, move the throttle stick to the lowest position. An additional confirmation beep indicates the throttle is properly calibrated.
Connect the bind cable to the receiver's B/VCC port and apply power to any other port. Press and hold your transmitter's bind key while turning it on simultaneously. The transmitter will automatically exit bind mode once the pairing is successful.
Since Turnigy is a premier brand distributed by HobbyKing, all customer support, troubleshooting, and warranty repairs are handled through the HobbyKing support center (support.hobbyking.com).