Terasic develops FPGA boards, system-on-modules, acceleration hardware and touch-screen accessories for electronics education, research and industrial development.
Terasic develops FPGA and SoC development kits, system-on-modules, acceleration hardware and accessories for education, research and industrial development.
Browse Terasic manuals for hardware setup, power requirements, interface connections, IP licensing and reference designs. Always match the guide to your product model and compatible FPGA board.
For technical assistance, contact support@terasic.com or +886-3-550-8800.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Browse this category for your exact product model. The MTL kit's system CD also includes its user manual, schematics, component datasheets and demonstration files.
Email support@terasic.com or call +886-3-550-8800. The MTL manual lists office hours of 9:00 a.m. to 6:00 p.m. (GMT+8).
The MTL manual specifies a dedicated power adapter because some FPGA boards cannot supply enough power. It notes that a separate adapter is not necessary with the DE2-115 board.
The MTL connects to compatible Terasic FPGA development boards through a 2x20 GPIO interface using the supplied IDE cable and IDE-to-GPIO adapter. Check the manual for compatibility and pin assignments.
Yes. Before compiling a Quartus II project using the Multi-touch IP, install the supplied license_multi_touch.dat file as described in the MTL manual. Preserve existing FEATURE lines when updating a license file.