Standard Pump manufactures premium industrial and hygienic drum pumps, AODD pumps, and fluid metering systems for safe material transfer.
Standard Pump, a brand of Unibloc Hygienic Technologies, is a trusted manufacturer of premium drum pumps, air-operated double diaphragm (AODD) pumps, and fluid metering systems. They specialize in safe, efficient fluid handling solutions for the chemical, sanitary, and industrial markets.
Their extensive product line includes electric and pneumatic drum pumps, high-viscosity pumps, and explosion-proof models specifically designed for transferring various materials from 55-gallon drums and tanks. Engineered for compliance and durability, Standard Pump products prioritize operational safety and long-lasting performance.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
When pumping flammable or combustible products, you must use an explosion-proof motor (such as the SP-420EX or SP-A1 series) along with proper grounding and bonding wires. Always check your specific pump's manual and NFPA guidelines before operation.
Standard drum pumps are generally intended for intermittent use. The factory recommends operating the pump for no more than 30 minutes at a time, followed by a 30-minute cool-down period to prevent motor overload.
When finished pumping, immediately flush the pump by running water or an appropriate non-flammable cleaning solution through it. For a more thorough cleaning, refer to the disassembly procedures in your instruction manual.
Using the speed control switch as the main ON/OFF mechanism causes excessive wear to the potentiometer and does not cut power to the motor, which could result in inadvertent activation and potential injury.