Sim Workshop makes flight and train simulator controllers, including sidesticks, motorized steering tillers and train controls for realistic desktop simulation.
Sim Workshop makes flight and train simulation hardware for desktop simulators and home cockpit setups. Products include the S3X Side Stick Set, SW Force Tiller and TSC-X Train Simulator Controller.
Browse model-specific manuals for installation, supported simulators, control assignments and troubleshooting. Features and software requirements vary by model.
For product assistance, contact info@simworkshop.net or visit the official Sim Workshop website.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Choose the manual matching your model, such as the TSC-X Train Simulator Controller, S3X Side Stick Set or SFT SW Force Tiller Set. Compatibility and setup steps differ by product.
Connect it to a Windows 10 or 11 computer via USB-C, then follow the manual's instructions for your simulator and interface software. Assign the levers and buttons, check for conflicting assignments and save your settings.
Check that the USB-C cable is securely connected and try another USB port. If controls do not respond, review the axis and button assignments in the interface software.
The provided manual lists Microsoft Flight Simulator 2020 and 2024, X-Plane 11 and 12, and Prepar3D v4, v5 and v6. Consult the model manual for installation details.
Email info@simworkshop.net with your product model and question. The supplied information does not specify warranty terms or a product registration process.