Silverflo offers soldering irons, soldering stations and hot air rework tools for electronics assembly, circuit board repair and component desoldering tasks.
Silverflo offers soldering irons, soldering stations, hot air rework equipment and desoldering stations for electronics assembly and circuit board repair.
Browse manuals for models such as the 938BD III and 853D to find setup instructions, temperature controls, calibration procedures, maintenance guidance and safety precautions. Match your unit's full model number and version before using a manual.
For warranty or service assistance, check the documentation supplied with your product or contact your seller.
Selected manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Match the full model number and version on your station to the manual title. Similar model names may have different controls, accessories and operating procedures.
Read the model-specific safety and setup instructions. Install the holders and any required nozzle while the equipment is cool, connect the soldering iron as directed and use a properly grounded outlet.
The 938BD III and 853D manuals describe digital calibration using the temperature adjustment buttons after the temperature stabilizes. Follow your exact model's procedure and use a measured temperature value.
Some models enter sleep mode after inactivity to reduce tip oxidation and energy use. The 938BD III manual describes a 10-minute sleep function; wake-up methods include moving the iron or pressing a soldering control button.
Check the paperwork supplied with your product or contact the seller with your model number and proof of purchase. No official Silverflo warranty, registration or support page has been verified.