SecuRAM Systems manufactures high-security electronic safe locks and smart home access control products, including fingerprint door locks, keypads, and smart switches.
SecuRAM Systems is a global leader in the design and manufacture of high-security electronic locks for safes, vaults, and ATM systems. With over 30 years of experience in the commercial security sector, the company has expanded its expertise into the residential smart home market.
SecuRAM offers a comprehensive ecosystem of connected security products, including the EOS Fingerprint Door Lock, Wi-Fi smart switches, and mechanical gate locks, all designed to provide homeowners with robust protection and convenience. Their smart devices can be managed remotely via the SECURAM Guard app, allowing users to monitor access, manage codes, and control their home security from anywhere.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Most SecuRAM safe locks use a 9-volt alkaline battery (Duracell or Energizer recommended). The battery compartment is typically located behind the keypad or at the bottom of the entry pad. Release the latch or slide the keypad up to access and replace the battery.
The factory default manager code for many SecuRAM safe locks is usually 1-2-3-4-5-6. It is highly recommended to change this code immediately after installation.
To factory reset a SecuRAM smart lock, locate the reset button (often inside the battery compartment on the interior assembly). Press and hold the button for about 5 seconds until you hear a voice prompt confirming the reset. This will delete all user codes and fingerprints.
Repeated beeps or a specific beep pattern often indicate a low battery or penalty lockout. Replace the battery with a fresh high-quality alkaline 9V battery. If the lock is in penalty mode due to incorrect code attempts, wait 5 to 15 minutes before trying again.