📘 Pingequa manuals • Free online PDFs

Pingequa Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Pingequa products.

Tip: include the full model number printed on your Pingequa label for the best match.

About Pingequa manuals on Manuals.plus

User Manuals, Instructions and Guides for Pingequa products.

Pingequa manuals

Latest manuals from manuals+ curated for this brand.

PINGEQUA nRF24, CC1101 AutoBand add-on for Cardputer ADV Instruction Manual

September 3, 2026

PINGEQUA nRF24, CC1101 AutoBand add-on for Cardputer ADV Overview The Hydra RF Module is an add-on for Cardputer ADV that combines nRF24, CC1101, and AutoBand functionality to enable use of…

PINGEQUA Cardputer RF 3-in-1 Module User Guide

June 22, 2026

PINGEQUA Cardputer RF 3-in-1 Module Specification Brand PINGEQUA Model Name M5Stack Cardputer V1.1 Connectivity Technology GPIO, GROVE Included Components 3in1 RF Module for M5Stack Cardputer Operating System Linux What's in…

PINGEQUA M5 Cardputer Adv Modules Instruction Manual

April 12, 2026

M5Stack Cardputer ADV Factory Firmware When the device encounters operational issues, you can try re-flashing the factory firmware to check if there is any hardware malfunction. Refer to the following…

Pingequa A07 Flipper Zero Ultra Compact Devboard Instruction Manual

September 27, 2025

Pingequa A07 Flipper Zero Ultra Compact Devboard Specifications Battery capacity: 800mAh All pins are gold-plated Signal pins equipped with TVS WiFi antenna: 3dbi GPS antenna: 20dbi 433M antenna: 3dbi All…

Hydra RF Module Setup Guide

installation guide

Setup and configuration instructions for the PINGEQUA Hydra RF Module, featuring nRF24, CC1101, and AutoBand support for the Cardputer ADV.

User Guide: Cardputer RF 3-in-1 Module

manual

Quick start guide and operational instructions for the Cardputer RF 3-in-1 Module designed for M5Stack Cardputer v1.1.

Flipper Zero 2-in-1 RF NRF24 & CC1101 Module Quick Start Guide

quick start guide

Quick start guide for the PINGEQUA Flipper Zero 2-in-1 RF NRF24 & CC1101 Module. Learn how to install, configure, and use the wireless module with Momentum firmware.

Pingequa manuals from online retailers

PINGEQUA NRF24 Module for Flipper Zero - Si24R1 Instruction Manual

NRF Module • May 5, 2026

This manual provides comprehensive instructions for the PINGEQUA NRF24 Module, designed for use with the Flipper Zero. It covers setup, operation, maintenance, troubleshooting, and specifications for educational prototyping…

Pingequa Flipper Zero 2-in-1 RF Devboard NRF24 + CC1101 Wireless Module Instruction Manual

NRF24&CC1101 RF 2in1 Module • January 30, 2026

Comprehensive instruction manual for the Pingequa Flipper Zero 2-in-1 RF Devboard, featuring NRF24 and CC1101 wireless modules. Includes setup, operation, and technical specifications.

Pingequa M5Stack StickC Plus NRF24 & CC1101 2-in-1 RF Module Instruction Manual

RF 2-in-1 Module with Case • January 29, 2026

Comprehensive instruction manual for the Pingequa M5Stack StickC Plus NRF24 & CC1101 2-in-1 RF Module. Covers setup, operation, troubleshooting, and specifications for both 2.4GHz and 433MHz communication.

Pingequa Flipper Zero Dual-Band WiFi Devboard User Manual

Wifi Devboards • November 24, 2025

Comprehensive user manual for the Pingequa Flipper Zero Dual-Band WiFi Devboard (BW16 RTL8720DN), covering setup, operation, and technical specifications for educational and research use.

Pingequa Flipper Zero Wi-Fi Devboard User Manual

WiFi Devboard • November 19, 2025

Comprehensive user manual for the Pingequa Flipper Zero Wi-Fi Devboard with ESP32-S2 chipset and pre-installed Marauder firmware, covering setup, operation, and specifications.

Pingequa Flipper Zero Wi-Fi Devboard Kit with Marauder Firmware Instruction Manual

WiFi Devboard Kit with Prototyping Board • November 19, 2025

Comprehensive instruction manual for the Pingequa Flipper Zero Wi-Fi Devboard Kit, including setup, firmware flashing, operating Marauder firmware, and technical specifications.

Universal BN59-01432A TM2360e Solar Charging Remote Control Replacement, USB-C Rechargeable, Voice Control, Compatible with Samsung QLED 4K/8K Neo, Crystal UHD, The Frame/Serif/Sero Smart TVs

BN59-01432A • August 25, 2025

Universal replacement remote control for Samsung Smart TVs, featuring solar and USB-C charging, voice control, and plug-and-play setup. Compatible with QLED, Crystal UHD, The Frame, The Serif, and…

PINGEQUA M5Stack Cardputer RF 3-in-1 Board Instruction Manual

M5Stack Cardputer RF 3-in-1 Board • May 5, 2026

Instruction manual for the PINGEQUA M5Stack Cardputer RF 3-in-1 Board, featuring NRF24L01+ PA/LNA and CC1101 Sub-GHz transceivers with a MicroSD slot, designed for IoT development, signal analysis, and…

PINGEQUA 2-in-1 RF Devboard for M5Stack Cardputer ADV Instruction Manual

RF 2-IN-1 Module • January 30, 2026

This manual provides instructions for setting up, operating, and maintaining the PINGEQUA 2-in-1 RF Devboard, compatible with M5Stack Cardputer ADV, NRF24, and CC1101, supporting 2.4GHz and 433MHz frequencies.