Ensure a secure and reliable connection with the FG1015 Leadwire and Cable Seal (Form 961126) by Minco. Designed for pressure applications up to 50 PSIG, this product includes essential components for multi-conductor feedthrough installations. Follow detailed instructions for a successful setup.
Learn how to use the TT521 2 Wire Programmable Transmitter with this comprehensive user manual. Discover its specifications, input types, and communication protocol. Follow step-by-step instructions for RTD and thermocouple temperature measurements. Suitable for mounting on DIN rail in safe or hazardous areas.
Learn about the FG212474 Flameproof and Increased Safety Union Assembly with this product manual. This assembly is certified for hazardous locations and includes male adapter, female flange, threaded collar, 2 set screws, and an allen wrench. Follow instructions carefully for safe use.
Learn about the S211596 Resistance Temperature Detector, an intrinsically safe and non-sparking product designed to protect from mechanical impact. Available in two installation methods and certified for use in hazardous locations, this temperature detector is a reliable choice. Get electrical data and installation instructions in the user manual.
Learn how to install and use the S211597 Intrinsically Safe and Non-Sparking Temperature Detectors with this comprehensive user manual. Designed to meet international standards, including ATEX and IECEx, this RTD protects from mechanical impact and can be used in explosive atmospheres. Follow the installation instructions and refer to the certificates for any special conditions of use.
Learn how to safely install and use the B216681 Miniature Temperature Detectors with our comprehensive user manual. These detectors are compliant with various safety regulations and designed for hazardous environments. Follow our instructions for effective operation.
Learn about the Increased Safety Thermal-RibbonTM RTDs from MINCO with this detailed user manual. This product is designed for use in rotating electrical machines or protective enclosures with a maximum voltage of 30V and measuring current of 10 mA. Conforms to IECEx and ATEX Directive 2014/34/EU standards.
Learn about Minco's certified FG4015 Steel Cable Gland for hazardous environments. Designed for use with RTDs, this fitting is certified to IECEx and ATEX standards for use in Zone 1 and 2 locations. This user manual provides product information, specifications, and installation instructions for the FG4015 and FG4014 + AC4015 Leadwire & Cable Seal Fitting.
Learn about the CH356, CH357, and CH358 Flameproof Connection Heads that protect against explosive atmospheres. These heads are certified under the ATEX Directive and conform to relevant legislation. Follow the safety instructions in the user manual for proper usage.
Discover the S207595 Non-Sparking Temperature Detectors from MINCO. Certified for use in explosive gas atmospheres, these detectors can measure temperatures from T3 to T6. Check out the installation instructions and electrical data for each model on the product manual page.
