Lifebreath manufactures high-efficiency Heat Recovery Ventilators (HRVs) and Energy Recovery Ventilators (ERVs) to improve indoor air quality and comfort.
Lifebreath is a leading manufacturer of innovative indoor air quality systems, specializing in high-performance Heat Recovery Ventilators (HRVs) and Energy Recovery Ventilators (ERVs). Their ventilation systems are engineered to continuously replace stale indoor air with fresh outdoor air while minimizing energy loss, creating healthier and more comfortable living or commercial spaces.
Key technologies include patented multi-speed cross-flow aluminum cores that maximize heat transfer, Washable MERV filters, and dynamic electronic wall controls and timers that allow users to fully customize their ambient ventilation. Whether using the compact residential lines like the RNC and MAX series or high-capacity dual-core models for commercial applications, Lifebreath focuses on reliable and resilient ventilation solutions.
On this page, you can find user manuals, installation guides, and operational instructions for a comprehensive range of Lifebreath equipment. These resources guide homeowners and HVAC professionals through setup, airflow balancing out of the box, digital control programming, and routine maintenance tasks such as cleaning the core and replacing washable filters.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
It is recommended to clean or replace the washable filters every 3 to 6 months, depending on usage, to ensure optimal ventilation performance.
Warranty coverage varies by model. For instance, many HRV models carry a lifetime warranty on the HRV core and a 5-year replacement parts warranty. Check your specific model's manual for precise details.
Yes, fan speeds can be adjusted using connected digital wall controls (like the 99-DXPL02) or via adjustable DIP switches located directly on the unit's circuit board.
Units should ideally be installed in a heated space with sufficient clearance for service access, such as a mechanical room or near an outside wall. Attic installations are not recommended unless it is a fully conditioned space.
Lifebreath wall controls feature modes like continuous ventilation, 20/40 minute intervals, or recirculation. They also include a dehumidistat to automatically increase fan speed when room humidity exceeds your setpoint.