HZXVOGEN manufactures versatile welding equipment including multi-process MIG, TIG, and stick welders, as well as plasma cutters for DIY and professional use.
HZXVOGEN is a provider of welding and cutting solutions, specializing in portable inverter technology. The brand offers a wide array of multiprocess welding machines capable of performing MIG, TIG, MMA (Stick), and Flux Core operations, often featuring synergic control systems and digital displays to assist operators in achieving precise results.
In addition to welders, HZXVOGEN produces air plasma cutters designed for efficient metal cutting. Their equipment is built to accommodate various skill levels, from hobbyists to professional fabricators, with a focus on safety, portability, and dual-voltage compatibility.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Operators must wear a suitable welding mask to protect eyes from arc radiation, heat-resistant gloves, and protective clothing to prevent burns from sparks and slag. ensure the work area is well-ventilated to avoid inhaling harmful fumes.
Check if the input cable is properly connected and if the power switch is closed. Inspect internal connections for loose patch cords or open circuits at the output terminals. If the issue persists, refer to the troubleshooting section of your specific model manual or contact a dealer.
No, most HZXVOGEN units are rated IP21S, which means they are not waterproof. Avoid using the machine in rain or wet conditions, and ensure the working environment is dry with humidity below 90%.
Use the function keys or mode selector switch on the front panel to toggle between MIG, TIG, and MMA modes. Ensure the corresponding torches and ground clamps are connected to the correct terminals for the selected process.