Harvest Technology provides advanced, ultra-low bandwidth video and secure data streaming solutions for remote industrial operations.
Harvest Technology specializes in delivering high-definition video and secure data over low-quality and constrained networks. Their proprietary protocols and unique devices, such as the Nodestream media interfaces and RiS encoders and decoders, enable real-time, zero-latency streaming. This robust technology is crucial for remote industrial environments, enabling key personnel to reliably monitor, assist, and communicate with frontline team members anywhere in the world, regardless of network conditions.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Connect the device to your LAN via the Ethernet port, power it on, and navigate to its IP address via a web browser. The device defaults to DHCP and can be located using an IP scanning tool.
Nodestream devices require specific firewall settings to communicate over a closed network. Ensure UDP ports 2100 to 2200, UDP 2025/2026, and TCP 2020 are open on your firewall.
The default login is username 'admin' and password 'admin'. You will be prompted to change this password when you first log into the configuration UI.
You can reset to factory defaults via the Web UI under the System Settings tab, or depending on the model, by holding the physical reset button as instructed in the user manual.