FlySpark offers FPV drone electronics, including flight controllers, ESC stacks and video transmitters, for building, configuring and maintaining drone systems.
FlySpark offers drone electronics, including flight controllers, ESC stacks and FPV video transmitters. Documented models include the F4 V1 BLS 60A Stack and VTX-F16 transmitter.
Browse available manuals for wiring diagrams, setup instructions, firmware update procedures and operating precautions. Always match the guide to your exact model and hardware revision, and remove propellers before bench configuration.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Available guides include the F4 V1 BLS 60A Stack flight controller and the VTX-F16 FPV video transmitter. Match the model and hardware revision before following instructions.
The manual specifies a USB connection to a computer and Betaflight or INAV Configurator. Follow the model-specific flashing instructions and verify the firmware target. Wireless firmware flashing is not supported.
Remove all propellers, check the ESC-to-flight-controller connections and follow the manual's power and firmware instructions. Verify compatibility before flashing replacement firmware.
Install the RF antenna first, verify power polarity and use a supply within the specified DC 7–36V range. The transmitter can become hot during operation; avoid touching its surface.
Check the documentation supplied with your exact product and ask the seller or FlySpark through its official website. A dedicated warranty or registration page has not been confirmed.