Fluid Conservation Systems Manuals & User Guides
FCS specializes in water loss control and leak detection technology, providing acoustic sensors, data loggers, and cloud monitoring solutions for utility networks.
About Fluid Conservation Systems manuals on Manuals.plus
Fluid Conservation Systems (FCS) is a premier North American provider of water leak detection and monitoring technologies. A subsidiary of Halma Water Management (HWM), FCS delivers rugged, high-precision equipment designed to identify and reduce water loss in utility infrastructures.
Their product lineup includes advanced acoustic leak detectors like the Lmic and Bmic, multi-channel data loggers such as the Multilog2, and the DataGate cloud-based management system. Headquartered in State College, Pennsylvania, FCS supports municipalities and businesses with reliable tools for surveying, pinpointing, and monitoring water distribution systems.
Fluid Conservation Systems manuals
Latest manuals from manuals+ curated for this brand.
FCS DataGate Cloud System User Manual
FCS Bmic Deluxe Acoustic Leak Detector User Guide
FCS MAN-154-0002 Patroller 4 Leak Detection User Manual
FCS S30 Ground Microphone for Leak Detection User Manual
FCS Multilog2 Multi Channel Data Logger User Manual
FCS MAN-147-0004 Multilog WW Evice Is Multi Purpose Data Logger User Manual
FCS S170 RadarSens Level Monitoring System for Wastewater Monitoring User Manual
FCS CGAS-D-IR Multi Channel Control System Installation Guide
FCS S30 Analog Leak Noise Amplification System Instructions
Fluid Conservation Systems support FAQ
Common questions about manuals, registration, and support for this brand.
-
How do I contact FCS technical support?
You can reach FCS DataGate and product support via email at customer.support@fluidconservation.com or by calling +1-800-531-5465.
-
Where can I find software for my FCS logger?
Software tools such as IDT (Installation and Diagnostic Tool) and other downloads are often hosted on the HWM Global help and downloads page linked in your product manual.
-
How do I charge the Lmic leak detector?
Connect the charger lead to the rear connector of the Lmic unit and plug the power lead into an AC supply. The unit typically charges overnight.
-
What does the red LED mean on my FCS device?
On many FCS devices like the Lmic or Bmic, a red LED typically indicates low battery power. On the Patroller 4, a flashing red LED may indicate no devices detected or a very low battery, depending on the flash pattern detailed in the user manual.