EunnacoTop specializes in universal remote control duplicators and accessories for garage doors, sliding gates, and home automation systems.
EunnacoTop is a manufacturer of smart home and security accessories, primarily focused on universal remote control duplicators. Their products are designed to clone fixed, learning, and selected rolling code remote transmitters, commonly operating at the 433.92MHz frequency.
These remotes provide convenient and reliable access solutions for a variety of applications, including garage doors, automatic sliding gates, skylights, car/motorcycle alarms, and home safety setups. By supporting an extensive range of IC chips, EunnacoTop remotes offer broad compatibility for users seeking hassle-free setup and reliable daily operation.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Press and hold the 'A' and 'B' buttons together until the LED flashes 3 times. Release the 'B' button, then click it 3 times while continuing to hold 'A'. The LED will flash, indicating the memory has been successfully cleared and the remote is ready to learn a new code.
Place the two remote controls side-by-side or back-to-back with zero distance. Press and hold the button you want to copy on the original remote, then press and hold the target button on the EunnacoTop remote. Keep holding until the LED on the EunnacoTop remote blinks twice, then three times, and remains steady.
EunnacoTop universal remote duplicators typically operate on the 433.92MHz RF frequency. Make sure your original remote operates at the same frequency before attempting to clone.
EunnacoTop remotes primarily support fixed and learning codes (such as 1527 and 2262), but specific models advertise compatibility with select rolling code systems like HCS200 and HCS301. Always verify the IC chip compatibility listed in the manual before purchase.