ERAARK specializes in modern aquatic products, offering intelligent fish tanks, smart water heaters, and filtration pumps controlled via the PETKIT app ecosystem.
ERAARK is an innovative brand dedicated to modern fishkeeping and aquatic habitats. With a strong focus on smart home technology, ERAARK produces intelligently designed aquariums, versatile submersible heaters, and efficient water pumps that cater to both beginners and seasoned aquarists.
By integrating their smart devices with the companion PETKIT app ecosystem, ERAARK allows users to easily monitor and control RGB lighting, adjust water temperature, set UV sterilization timers, and manage filtration systems seamlessly from their smartphones. Their sleek, minimalist hardware design ensures that each aquarium serves not only as a stable habitat for aquatic life but also as an elegant, contemporary addition to modern homes.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
ERAARK smart aquariums and heaters are designed to operate using the PETKIT app. You can download the PETKIT app from the iOS App Store or Google Play Store to connect and control your aquarium's lighting, water pump, and temperature settings.
To properly clean the rear filter chamber, first disconnect the power supply. Remove the filter elements and gently rinse the filter cotton and biochemical media using tank water. Never use untreated tap water on the biological filter media, as this will destroy beneficial bacteria.
To maintain stable water parameters, it is recommended to replace no more than 1/3 of the tank water weekly using a dedicated water-changing tool. Always treat tap water to remove chlorine before adding it to the tank.
This is part of the built-in 'Feeding Mode.' When the feeding lid is opened, the water pump automatically pauses for 10 minutes to prevent fish food from being immediately sucked into the filtration system. You can enable or disable this feature in the app.
Double-click the power button on the heater's control module to activate Wi-Fi networking functionality. Then, open the PETKIT app, press the '+' button on the main page to add a device, and follow the in-app prompts to pair the heater.