E+E Elektronik provides high-quality sensor solutions for humidity, temperature, air velocity, flow, and CO2 measurement in HVAC and industrial applications.
E+E Elektronik is a leading manufacturer of high-end sensor solutions and measurement systems based in Austria. Producing intelligent sensors for over 40 years, the company specializes in precision instruments for measuring relative humidity, moisture in oil, dew point, air velocity, mass flow, CO2, and temperature.
The brand's product lineup is widely used in building automation, HVAC, cleanrooms, and demanding industrial process controls. E+E Elektronik is well known for continuous innovation, from highly robust sensing elements such as the rapidX pluggable modules to versatile digital and analog transmitters. As an EN ISO/IEC 17025 accredited calibration laboratory, E+E guarantees accurate, traceable, and reliable measurement technology.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Measurement units (metric or non-metric) generally must be chosen according to the ordering guide at purchase. Switching between unit systems via the PCS10 configuration software is not possible on most devices once ordered.
Many E+E sensors can be configured via the free PCS10 Product Configuration Software. You will typically need to connect the sensor to your PC using the official E+E USB configuration adapter.
Addresses can often be set via the DIP switches directly on the device's electronics board, which will override the software-set default address. If all DIP switches are set to 0, the address is determined via the PCS10 software.
A flashing red LED typically indicates that the measured data is out of the selected measuring range, which could be caused by an overload or a reversed pressure connection.