ENOVATES Manuals & User Guides

ENOVATES eDLB2.0 Active Load Balancing Product Information Technical Specifications Measuring Instrument: Phoenix Contact EEM-MA371 Display: LCD with two-colour backlit Supply Voltage Range: 100-230V AC or 150-250V DC Power Consumption: 4W…

Enovates eDSB Active Load Balancing Specifications Input voltage: AC Min current: 80A Protocol: Modbus Bus type: RS485 Input type: Screw terminals Cable length: Recommended < 100m Terminals: Screw terminals Type…

ENOVATES SWB-4xx-22-T2 Single Wallbox Product Information The Single Wallbox is a charging device for electric vehicles. It is available in four versions: T2, C7, T2S, and T2SE. The product features…

ENOVATES CLIPON-COIL-3 Elegant Charging Pillar Product Information The CLIPON-COIL-3 is a clip-on coil for measuring current and is compatible with the Enovates charging stations/platforms SWB 4XX and variants. It comes…

Enovates SWB Series Single Wallbox SAFETY INSTRUCTIONS Purpose Safety instructions are provided below in order to ensure safe, longterm use of the product. Failure to comply with the instructions and…

ENOVATES Generation 2022 Single Wallbox Pedestal REQUIRED TOOLS # Description Amount 1 eNovates pedestal x1 2 Spirit level x1 3 Folding rule x1 4 Screwdriver Torx T25 x1 5 Screwdriver…

ENOVATES Single Wallbox Pedestal  SAFETY PRECAUTIONS Safety terminology Danger texts provide important information to avoid situations with a high chance to cause severe malfunction, damage, injuries or death. Warning texts…

This manual provides comprehensive technical guidance for installing and configuring the Enovates eDLB2.0, a device for active load balancing in electric vehicle charging islands. It covers product specifications, installation procedures,…