ELABRICK provides an innovative, lightweight smart brick slip system for easily creating authentic masonry looks on interior and exterior walls.
Manufactured by Elastolith Nederland BV, ELABRICK offers a unique, hand-made brick slip system designed for both interior and exterior wall finishes. Since 1982, they have been producing these high-quality, lightweight brick slips in Haaksbergen, Netherlands.
The ELABRICK system is known for its flexibility, low weight, and ease of application, making it simple to create a realistic masonry look without the heavy labor of traditional bricklaying. Find comprehensive installation instructions, preparation guides, and product specifications below.
Selected manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To install ELABRICK brick slips, first prepare the wall with ELABRICK Primer. Next, mark horizontal layers using a spirit level, and apply the ELABRICK Special Adhesive using a notched trowel. Press the brick slips firmly into the adhesive and smooth the seams with a moist brush.
Yes, ELABRICK brick slips are suitable for both interior and exterior use. They are water-repellent, vapour-permeable, colourfast, and can withstand temperatures from -40°C to +100°C.
You should treat the surface with ELABRICK primer and allow it to dry for 24 hours before applying the special adhesive and brick slips.
Vapor-permeable, porous, woody, and bituminous surfaces are typically unsuitable. The surface must be able to bear the weight, be permanently dry, clean, and solid.