Ecoforest is a leading manufacturer of renewable energy heating systems, specializing in high-efficiency geothermal and aerothermal heat pumps, as well as biomass pellet stoves and boilers.
Ecoforest is a pioneering company in the HVAC and renewable energy sector, recognized for developing advanced heating, cooling, and domestic hot water solutions. Founded with a vision for sustainability, Ecoforest manufactures a wide range of products including the ecoGEO ground-source heat pumps, ecoAIR air-source heat pumps, and a diverse lineup of biomass pellet stoves and boilers.
The brand distinguishes itself through technological innovation, such as the use of Inverter technology and natural refrigerants like R290, which significantly boost efficiency and reduce environmental impact. Designed for residential, commercial, and industrial applications, Ecoforest systems feature intelligent control interfaces like the ecoSMART and e-SUPERVISOR strategies, allowing for seamless integration with photovoltaic systems and precise energy management. Whether providing climate control for a single-family home or large-scale installations, Ecoforest ensures optimal performance, comfort, and energy savings.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To reset the EASYNET GATEWAY G2 to factory settings, locate the reset button on the device and hold it down for approximately 10 seconds until all lights flash simultaneously.
It is advisable to regularly check the pressure of the intake and production circuits (typically between 0.7 and 2 bar) and clean the exterior with a damp cloth. Specific technical maintenance should be performed by an authorized technician.
Ecoforest stoves are designed to use wood pellets. Ensure the pellets meet the specifications outlined in the user manual (e.g., length, ash content, and moisture) and use fuel suggested by authorized distributors.
If a leak is suspected, ventilate the area immediately, avoid touching the leak to prevent frostbite, and evacuate the area. Contact authorized technical service to handle the refrigerant recovery and repair.
You can register your equipment on the official Ecoforest website under the 'Register Equipment' or warranty section to ensure your guarantee is active.