E-Mon makes electric submeters, current sensors and pulse interfaces for monitoring energy use, supporting tenant billing and building energy management systems.
E-Mon provides electrical submeters, current sensors and pulse interfaces for monitoring energy use, tenant billing and building energy management.
Find installation and operating manuals covering wiring, sensor placement, display functions and pulse settings. Match each manual to your exact model and electrical ratings. Installation wiring must be performed by qualified personnel following applicable electrical codes.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Match the model or part number on your equipment to the manual title. Check that the meter class, voltage rating and current sensor specifications also match.
Only qualified personnel should perform installation wiring. Follow the model-specific manual, de-energize the mains before wiring and comply with local and national electrical codes.
Product literature lists +1-800-334-3666 and info@emon.com, with hours Monday–Friday, 8:00 AM–7:30 PM EST. These details appear in older manuals and may have changed. Have your model number and issue details ready.
Use the manual for your exact meter or pulser interface. The P3 pulser manual includes DIP switch settings for pulse value and width; other models may use different settings.
Check the documentation supplied with your product or ask E-Mon support. No dedicated warranty or registration page is confirmed in the available information.