Die Manuals & User Guides

tandy Pro 3983-XX Rivets and Burrs Press Die Specifications Item Details Model Numbers 3983-01, 3983-02, 3984-00 Brand TandyPro Machines Instructions for Use Install dies into press with die marked "L"…

MIGHTY 38 Super Gold Match TNT Taper Crimp Die  Installation Instruction Place seated round into the plate or tool head. STEP 1 Turn the die down by hand to set…

MIGHTY ARMORY 357 Pistol Flare Expander Die Instructions Installation Instruction Place a sized case into the flare expander station. Raise the ram up or tool head down. STEP 1 Raise…

Gold Match Rifle Sizing Die MIGHTY ARMORY RIFLE SIZING DECAPPING INSTRUCTIONS STEP 1 Hand turn the pin into the shaft about 3/4 of the way. Put a touch of vibra-tite 111 on the pin barrel (or pointer barrel) shoulder where it meets the shaft. Snug the pin into the shaft with a 3/16 wrench. Do not over tighten, or it may result in a snapped threaded shaft in the main shaft. STEP 2 Drop the shafted pin (or pointer on the shaft) into the die body. Drop the spring into the cap well. STEP 3 Thread the cap into the cap well. Tighten the cap all the way down snug against the o-ring. Back out the cap 1/4 a turn. STEP 4…

MIGHTY BAF310Etopg Magnum Case Hold Down Die Instruction Manual STEP 1 Hand turn the tip into the shaft. Put a touch of purple vibra-tite 111 on the tip barrel shoulder…

XMA & XMS HOLD DOWN INSTRUCTIONS XMA Case Hold Down Die STEP 1 Disassemble the die. Degrease all parts (of XMS die). XMA Die does not require cleaning.STEP 2 Add…

SUPER DUTY DECAPPING INSTRUCTIONS Super Duty Case Hold Down Die STEP 1 Install pin tip on shaft with a touch of purple vibra-tite 111 between shoulder of shaft and pin.…

BIG BOY DECAPPING DIE INSTRUCTIONS Big Boy Decapping Die STEP 1 Remove the shaft from the die body. Turn the pin into the shaft.STEP 2 Add a touch of vibra-tite…

RIFLE FLARE EXPANDER DIE INSTRUCTIONS Rifle Flare Expander Die STEP 1 Turn the die into the tool head.STEP 2 Lower the tool head over a sized case.STEP 3 Set flare…

MIGHTY Rifle Trim Die Product Description Set your Mighty Armory Trim die to touch your shell plate. Size the case. Measure the amount you want to trim. Set your router…