CNMAWAY is an electromechanical brand specializing in DC motors, linear actuators, variable frequency drives, warning lights, and remote control switches.
CNMAWAY manufactures a wide range of electronic and electromechanical hardware components designed for DIY projects, automated assembly lines, and industrial applications. Their comprehensive product lineup includes permanent magnet synchronous motors, brushed DC gear motors, linear actuators, and variable frequency drives (VFD) for precision speed control.
In addition to motion and automation control components, CNMAWAY produces heavy-duty signal warning lights, liquid transfer diaphragm water pumps, and wireless RF remote control relay switches. Widely accessible through global online marketplaces, CNMAWAY provides cost-effective mechanical and electrical automation solutions for both hobbyists and industrial professionals alike.
Selected manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
After performing a reset, hold the pairing button. To select jogging mode, release the button when the indicator flashes once. To select interlock mode, release it after two flashes. For self-lock mode, release it after three flashes.
Following a reset and mode selection, press and hold the learning button until the indicator light illuminates. Release the button, then press the desired button on your remote control. Let the indicator light turn off to confirm successful pairing.
For AC voltage models, there is no positive or negative wire requirement. For DC models (e.g., 12V or 24V), you must observe correct polarity; typically, the black wire is the negative terminal.
For basic connections, terminals L1 and L2 are utilized for your 220V power input. The U, V, and W terminals connect safely to your three-phase motor output, and FG is for the frame ground.
