Cerberus (also known as Cerberus Pyrotronics) manufactured commercial fire alarm systems, smoke detectors, and control panels for industrial and safety applications.
Cerberus, operating under the names Cerberus Pyrotronics and Cerberus Piezotronics, was a prominent manufacturer of commercial fire detection and control systems. Their product line included ionization smoke detectors (such as the DI-3 series), System 3 control modules, supplementary relays, and advanced Remote Command Centers.
Known for early intelligent initiating devices, Cerberus provided robust equipment for a wide range of commercial, industrial, and institutional applications. Today, manuals for these legacy systems remain essential for technicians servicing and maintaining existing installations.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
The sensitivity of the DI-3, DI-A3, and DI-B3 detectors is factory preset. It can be monitored in the field using the Cerberus Pyrotronics sensitivity tester module TM-I3 without removing the detector from its base.
The FPI-32 SensorLINK Programmer/Tester is a portable device used for programming and testing intelligent initiating devices, eliminating the need for mechanical address programming pins or dipswitches.
Yes, DI-3 series detectors are fully compatible with other Cerberus Pyrotronics System 3 compatible detectors. However, no more than 30 detectors of any type combination (excluding thermals or manual stations) may be used on any one circuit.
The RCC-1 is a Remote Command Center for use with the MXL system. It features an 80-character LCD display and keypad, allowing operators to acknowledge events, silence audibles, and reset the system from a remote location.