MM-35
System 3™ Accessory Module
ENGINEER AND ARCHITECT SPECIFICATIONS
Meter Module
- Voltmeter
- Ammeter
Listed and ULC Listed- NYMEA, CSFM and FM Approved
Description
The Cerberus Piezotronics Meter Module, Model MM-35, is designed to provide visual indication of both battery voltage and charging current. It is used in conjunction with Battery Charger Modules, Models BC-35, BE-35 and in systems fitted with emergency standby power.
Both a voltmeter and an ammeter are contained in the MM-35. The voltmeter provides a voltage reading value of the battery at all times while the ammeter shows the charging current.
The Model MM-35 is placement supervised, providing a system trouble signal upon removal from the system.
The Model MM-35 is Underwriters Laboratories, Inc. listed.
Engineer and Architect Specifications
Two meters shall be provided, mounted in a single module assembly for the purpose of indicating the battery voltage and the battery charging current. This module, Cerberus Piezotronics Meter Module Model MM-35, shall be system interconnected by a plug and harness assembly and shall be operable with the main control panel.
The Meter Module, Model MM-35, shall only be used in conjunction with the Battery Charger Module, Model BC-35 and BE-35.
The Model MM-35 shall be placement supervised and shall be Underwriters Laboratories, Inc. listed.
Electrical Information
Current Requirement: Normal — None
Ordering Information
| Model No. | Description | Shipping Wt. |
| MM-35 | Meter Module | 1 lb. (.45 kg.) |
Typical Wiring
Cerberus Piezotronics
8 Ridgedale Avenue
Cedar Knolls, NJ 07927
Tel: 201-267-1300
FAX: 201-397-7008
Cerberus Piezotronics
50 East Pearce Street
Richmond Hill, Ontario
L4B, 1B7 CN
Tel: 905-764-8384
FAX: 905-731-9182
4/96 10M CPY-IG
Printed in U.S.A.
April 1995
Supersedes sheet dated 5/95
firealarmresources.com
Documents / Resources
 | CERBERUS MM-35 System 3 Meter Module [pdf] Owner's Manual MM-35, MM-35 System 3 Meter Module, System 3 Meter Module, Meter Module, Module |
