User support and manuals for generic, unbranded, and white-label CCTV security cameras commonly used with apps like i-Cam+.
The CCTV Camera category represents a broad spectrum of generic and white-label video surveillance devices available in the consumer market. These products are often manufactured by various OEM providers and sold under simple descriptive names without a distinct major brand label. They typically offer standard features such as 1080p HD video, Wi-Fi connectivity, night vision, motion detection (PIR), and two-way audio.
While hardware designs vary, many of these generic CCTV cameras utilize shared software ecosystems. Common mobile applications for these devices include i-Cam+, V380, Yoosee, and Tuya Smart. The manuals provided in this section cover setup procedures, AP mode configuration, resetting instructions, and troubleshooting connectivity issues for these widely used, cost-effective security solutions.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Many generic CCTV cameras use universal apps such as i-Cam+, V380 Pro, Yoosee, or Tuya Smart. Check the QR code on your product packaging or manual to identify the correct application.
Locate the reset button (often a small button near the SD card slot or on the power cable). Press and hold it for 5-10 seconds while the device is powered on until you hear a voice prompt or 'beep'.
Most generic generic CCTV cameras only support 2.4GHz Wi-Fi networks. Ensure your phone is connected to a 2.4GHz network during setup, and that the Wi-Fi password contains no special characters if the pairing fails.
AP (Access Point) Mode allows the camera to create its own local Wi-Fi hotspot (often named 'IPCam...' or similar). You connect your phone directly to this hotspot to configure the camera's settings before connecting it to your home router.