CamCast offers camera monitoring equipment, including the CT-1 transmitter and companion app, for multi-screen viewing and remote camera control during production.
CamCast camera monitoring equipment includes the CT-1 Multi-Screen Monitoring System and CamCast app. The CT-1 supports camera-to-device transmission and connections for up to four CamCast monitoring devices on the same network.
Browse model-specific instructions for mounting, power, Wi-Fi pairing, and PTP remote camera control. The CT-1 guide covers a 5V/3A power input, NP-F battery power, and USB-C data cable requirements.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
It covers mounting, power options, Wi-Fi pairing, camera transmission, and PTP remote camera control.
The guide specifies power through the 5V/3A charging port or an NP-F battery. Hold the ON/OFF button for five seconds to turn the device on or off.
Turn on the CT-1 and check its OLED screen for the SSID and Wi-Fi password. Download the CamCast app and use the displayed password to connect your receiving device. Up to four CamCast monitoring devices can share the network.
Connect the CT-1 PTP port to the camera's Type-C port with a USB-C data cable. Charging-only cables are not supported.
No verified CamCast warranty or registration page is available in the supplied information. Check your product documentation or ask the seller for the applicable details.