Bluelab manufactures high-precision measurement technology for controlled environment agriculture, specializing in pH, conductivity, and temperature meters for hydroponics.
Bluelab is a global leader in measurement tools for controlled environment agriculture, specifically designing weak-point-free equipment for hydroponic, aquaponic, and soil-based growing systems. Based in New Zealand with a strong presence in the United States, Bluelab produces a wide range of devices including the industry-standard Guardian Monitor, Truncheon Nutrient Meters, and handheld pH pens.
Known for durability and accuracy, Bluelab products help growers manage nutrient solutions by providing precise readings of pH, conductivity (EC/ppm), and temperature. The company emphasizes proper probe care and regular calibration to ensure optimal crop health and yield. Their portfolio extends from simple handheld indicators to automated dosing controllers for commercial operations.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Always keep the pH probe tip wet. Store it in the storage cap with Bluelab pH Probe KCl Storage Solution. Never use distilled, RO, or de-ionized water, as this will damage the probe.
It is recommended to calibrate pH meters at least every 30 days, or whenever you suspect readings are inaccurate. Conductivity (EC) probes normally do not require calibration but should be cleaned regularly.
If the probe tip dries out, hydrate it by soaking it in KCl storage solution for 24 hours. After hydration, clean and calibrate the probe to check if it has suffered permanent damage.
Remove the shroud and place a few drops of Bluelab Conductivity Probe Cleaner on the probe face. Rub vigorously with a chamois or finger, then rinse thoroughly under running water to remove all traces of cleaner.
'Or' stands for Over Range, meaning the solution exceeds the measurement max. 'Ur' stands for Under Range, meaning the solution is below the measurement min.