BION is a prominent manufacturer of medical mobility aids, home care equipment, and advanced cycling performance sensors.
BION manufactures a diverse array of products tailored for health, mobility, and athletic performance. Under Bion Advance based in Singapore, the brand provides essential home care solutions including safety bedrails, mobility wheelchairs, commodes, and pressure monitors designed to improve patient independence.
Additionally, BION produces advanced cycling technology, featuring ANT+ and Bluetooth-enabled power meter pedals and wireless cadence sensors designed to pair seamlessly with top virtual cycling apps like Zwift, Rouvy, and Kinomap.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Pull the bolts on both sides of the bedrail, gently turn both sides outward at the same time, and continue folding until it is in its fully folded position.
Spin the cranks backward to wake up the meter, ensure both pedals are successfully connected (green flashing light), position the left crank at 6 o'clock and the right at 12 o'clock, and use the Ride for Life App to hit 'Calibrate'.
The sensor should be installed on the inside of the non-drive side crank arm using the provided rubber pad and ties. Ensure it does not touch the bike frame or your shoe when rotating.
Yes, BION sensors support both BLE (Bluetooth Low Energy) and ANT+ protocols, allowing connections to smartphones, bike computers, and fitness apps like Zwift and Kinomap.