APORO manufactures portable voice amplifiers, wireless microphones, and loudspeakers designed for clear communication in classrooms and public speaking.
APORO is a dedicated audio brand specializing in portable voice amplification systems and wireless microphones. Manufactured by Shenzhen Jincheng Weiye Electronics Co., Ltd., APORO products are designed to serve teachers, tour guides, coaches, and presenters who require reliable, high-volume sound projection. The product line includes UHF and 2.4G wireless voice amplifiers, wired headsets, and multifunctional loudspeakers that incorporate Bluetooth connectivity, FM radio, and audio recording capabilities.
Known for models like the T9, T18, and T21, APORO amplifiers often feature compact, ergonomic designs with long-lasting lithium batteries. The brand focuses on delivering clear, non-distorted audio to reduce vocal strain for professionals working in large rooms or outdoors.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Turn on the microphone first and long-press the 'M' key until the blue light flashes. Then turn on the amplifier. The devices should pair automatically. For 2.4G models, if the display stops flashing, the connection is successful.
This is feedback caused by the microphone being too close to the speaker. To stop the howling, move the microphone away from the amplifier, ensure the microphone is not pointing directly at the speaker, and lower the volume if necessary.
Most APORO models, such as the T9 or T18, offer an amplifying time of 8-10 hours and music playback of 6-10 hours on a full charge. Charging typically takes 4-6 hours.
Extend the antenna, press the 'M' (Mode) button to switch to FM mode, and then long-press the play button for 2 seconds. The device will automatically search for and save available radio stations.
If the connection fails, turn off both devices. Turn on the microphone, enter pairing mode (usually by holding the 'M' button until flashing), then turn on the amplifier to re-establish the connection. Also, ensure both devices are fully charged.