Learn about the Ameritron AL-1200 Power Amplifier, a 1500 watt output linear amplifier that operates from 160 through 15 meters. This user manual provides detailed instructions for unpacking, installing the transformer and tube, and operating the amplifier efficiently with a class AB2 grounded grid circuit.
Learn how to operate the Ameritron AL-1200 Full Power Linear Amplifier with this comprehensive user manual. This 1500 watt output amplifier features a 3CX1200A7 tube and class AB2 grounded grid circuit. Follow the step-by-step instructions for proper installation and maintenance.
Learn how to power up and operate the Ameritron AL-1200 and AL-1200X Amateur Amplifiers with this helpful user manual. Find detailed instructions for unpacking, installation, and specifications for these powerful amplifiers featuring a single 3CX1200A7 tube.
Learn how to properly connect the AMERITRON PNP-35 Amplifier Keying Interface Cables with this user manual. These interface cables work with all standard manufactured amplifiers, including B&W, Collins, Kenwood, Yaesu, and more. Connect the Phono cable from the AMP jack of the ARB to the Amplifier's Relay and ALC for optimal performance. Ensure your amplifier relay or control system is pulled to ground to activate for safe use. Contact Ameritron's Technical Service for any questions or issues.
Learn how to install and operate the Ameritron RCS-4 Remote Coax Switch with ease by reading the instruction manual. This remote-controlled switch allows up to four separate antennas to operate using only one coax feedline. The manual provides detailed information about installation, cable connections, and control console connections. Make the most of your RCS-4 with this comprehensive guide.
